OILFIELD RFQ
ReferenceToolsProduct CatalogGuidesStandardsGlossary
SearchSubmit RFQ

Equipment specification index

Oilfield Equipment Reference

Search common equipment and tool names, review available images and technical parameters, then continue to the canonical product page to prepare an RFQ.

144 equipment references

Modular amine contactor and solvent regeneration skids for natural-gas treatment

Produced Water & Gas Treatment

Amine Gas Sweetening Units

Amine Gas Sweetening Units for removal of hydrogen sulfide and carbon dioxide from natural gas using a selected amine solvent system, with RFQ fields covering feed gas composition and contaminants, minimum normal and maximum flow, pressure and temperature, required H2S and CO2 outlet limits, solvent selection and concentration, circulation rate, absorber and regenerator design, reboiler duty, flash and acid-gas handling, filtration, corrosion control, foaming risk, metallurgy, sour service, utilities, emissions, controls and guarantee test.

Standard
ASME BPVC Section VIII, project acid-gas treatment specification
Size range
H2S, CO2 and contaminant composition
Pressure / load
Flow, pressure and temperature
Model
Feed and product
Remark
State contractual outlet limits
View RFQ page
High strength stud bolts threaded rods and heavy hex nuts

Completion & Well Service

API 20E and 20F High-Strength Stud Bolts

High-strength stud bolts, threaded rods and nuts for oilfield and petrochemical service, with published diameters of M12-M130 and lengths up to 9500 mm.

Standard
API 20E, API 20F, ASTM A193, ASTM A320 as specified
Size range
M12-M130 / 1/2-5 in
Pressure / load
M12-M130 published diameter range
Model
Published diameter range
Remark
Confirm thread pitch and standard
View RFQ page
Coated large-diameter steel line pipe in a fabrication yard

Pipeline Construction & Maintenance

API 5L Line Pipe

API 5L Line Pipe for onshore and offshore oil, gas, water and multiphase transmission or gathering pipelines, with RFQ fields covering outside diameter, wall thickness, length, PSL, steel grade, seamless or welded process, delivery condition, sour or offshore service, design pressure and temperature, dimensional tolerance, end preparation, coating, impact testing, hydrotest, NDT, mill documents and project supplementary requirements.

Standard
API Spec 5L, governing pipeline design code
Size range
OD, wall thickness, length and end preparation
Pressure / load
RFQ based
Model
Pipe geometry
Remark
Attach line list and dimensional tolerances
View RFQ page
Horizontal overhung centrifugal process pump beside oil and gas process valves

Process Valves, Pumps & Compression

API 610 Centrifugal Process Pumps

API 610 Centrifugal Process Pumps for crude, hydrocarbon, produced-water and utility pumping in upstream and process facilities, with RFQ fields covering rated and normal flow, differential head, suction pressure, NPSH available, fluid properties, solids, vapor pressure, operating temperature, pump arrangement, metallurgy, mechanical seal plan, driver, utilities and site conditions.

Standard
API 610, ISO 13709, project pump datasheet
Size range
Differential head and suction conditions
Pressure / load
Normal, rated and minimum continuous flow
Model
Hydraulic duty
Remark
Attach the completed pump datasheet and system curve
View RFQ page
Skid-mounted reciprocating natural-gas compressor package with cooler and controls

Process Valves, Pumps & Compression

API 618 Reciprocating Gas Compressor Packages

API 618 Reciprocating Gas Compressor Packages for natural-gas gathering, booster, vapor-recovery, fuel-gas and process-gas compression, with RFQ fields covering gas composition and molecular weight, suction and discharge pressure, temperature, required capacity, turndown, number of stages, cylinder lubrication, driver, speed, cooling, pulsation control, material compatibility, hazardous area and emissions requirements.

Standard
API 618, project compressor datasheet
Size range
Gas composition, MW and contaminants
Pressure / load
Normal and rated flow
Model
Gas and capacity
Remark
Provide water, H2S, CO2 and liquid carryover data
View RFQ page
Forged oilfield valves, flanges and pressure-containing components

Wellhead & Pressure Control

API 6A Gate, Choke and Check Valves

API 6A Gate, Choke and Check Valves for surface wellhead, production tree, pressure isolation and controlled flow, with quotation fields for rated working pressure, nominal bore, temperature class, material class, PSL/PR level, end connection and sour-service requirements.

Standard
API 6A, project specification
Size range
RFQ based
Pressure / load
2,000-20,000 psi, project dependent
Model
Pressure class
Remark
State the required working pressure
View RFQ page
API-style wellhead and Christmas tree pressure-control assembly

Wellhead & Pressure Control

API 6A Wellhead and Christmas Tree Equipment

API 6A Wellhead and Christmas Tree Equipment for surface wellhead, production tree, pressure isolation and controlled flow, with quotation fields for rated working pressure, nominal bore, temperature class, material class, PSL/PR level, end connection and sour-service requirements.

Standard
API 6A, project specification
Size range
RFQ based
Pressure / load
2,000-20,000 psi, project dependent
Model
Pressure class
Remark
State the required working pressure
View RFQ page
Full-bore flanged trunnion ball valves for oil and gas pipeline service

Process Valves, Pumps & Compression

API 6D Pipeline Ball Valves

API 6D Pipeline Ball Valves for pipeline, gathering, station isolation and piggable full-bore oil and gas service, with RFQ fields covering nominal size, pressure class, full or reduced bore, end connection, body construction, material and trim, seat and seal system, fluid composition, design temperature, actuation, fire testing, fugitive-emission and sour-service requirements.

Standard
API Spec 6D, ISO 14313, project piping specification
Size range
NPS/DN and full or reduced bore
Pressure / load
ASME class or project pressure rating
Model
Size and rating
Remark
State pipeline design pressure and temperature
View RFQ page
Onshore production storage tanks with stairs, vents and contained piping

Oil Storage, Metering & Loading

API Production Storage Tanks

API Production Storage Tanks for atmospheric storage of crude oil, produced liquids or compatible oilfield fluids at production and gathering sites. Review process cases, metering or storage basis, safety functions, interfaces, approvals and test records before requesting a comparable quotation.

Standard
API Spec 12F, API Std 650 or project-selected tank standard
Size range
Fluid properties and temperature
Pressure / load
Nominal/working volume and fill rate
Model
Capacity and fluid
Remark
Provide operating and upset inventory cases
View RFQ page
Automatic crude oil sampler and sample receiver integrated with metering piping

Oil Storage, Metering & Loading

Automatic Crude Oil Sampling Systems

Automatic Crude Oil Sampling Systems for flow-proportional collection and handling of representative crude-oil samples for custody or quality determination. Review process cases, metering or storage basis, safety functions, interfaces, approvals and test records before requesting a comparable quotation.

Standard
Applicable API MPMS sampling chapters, contract laboratory requirements
Size range
Crude, viscosity, wax, water and temperature
Pressure / load
Flow range and batch duration
Model
Stream conditions
Remark
Provide mixing assessment and sample objective
View RFQ page
Bolted steel oil storage tanks with panel seams and galvanized access stairs

Oil Storage, Metering & Loading

Bolted Steel Oil Storage Tanks

Bolted Steel Oil Storage Tanks for modular field assembly of production or process-liquid storage where transport and site construction constraints favor bolted panels. Review process cases, metering or storage basis, safety functions, interfaces, approvals and test records before requesting a comparable quotation.

Standard
API Spec 12B, project modular-tank specification
Size range
Diameter, height and panel module
Pressure / load
Working volume and fill/withdrawal rates
Model
Tank envelope
Remark
Define transport and crane limits
View RFQ page
BOP accumulator bottles hydraulic reservoir and remote control panel

Wellhead & Pressure Control

BOP Accumulator and Control Units

Surface BOP control units with FKQ, FKDQ and FKD configurations, dual pump systems, defined accumulator sizing rules and ambient options from -40 to 60 degrees C.

Standard
API 16D, SY, T 5053.2, project well-control specification
Size range
RFQ based
Pressure / load
System-specific usable hydraulic volume
Model
Standard ambient range
Remark
Protective housing is needed outside this range
View RFQ page
Well control equipment with BOP sealing elements and hydraulic components

Wellhead & Pressure Control

BOP Rubber Elements and Seals

Annular elements, ram packers and well-control seals selected by BOP model, 120-760 mm bore references, 21-105 MPa pressure class and verified elastomer compatibility.

Standard
API 16A, approved BOP drawing and elastomer specification
Size range
120-760 mm
Pressure / load
21-105 MPa referenced pressure classes
Model
Referenced bore envelope
Remark
Match the exact BOP model and drawing
View RFQ page
BOP ram blocks, annular packing elements and replacement seals

Wellhead & Pressure Control

BOP Spare Parts

BOP Spare Parts for blowout-preventer maintenance, ram or annular sealing and well-control spare replacement, with quotation fields for BOP manufacturer and model, bore, working pressure, ram type, elastomer compound, service temperature and serial or drawing reference.

Standard
API 16A, OEM drawing
Size range
RFQ based
Pressure / load
OEM/model/serial number
Model
Identification
Remark
Nameplate photo strongly recommended
View RFQ page
Production packers, bridge plugs, retainers and well completion accessories

Completion & Well Service

Bridge Plugs and Cement Retainers

Bridge Plugs and Cement Retainers for zonal isolation, production completion, remedial cementing, temporary plugging and well intervention, with quotation fields for casing size and weight, setting depth, differential pressure, temperature, setting method, retrievability, elastomer/fluid compatibility and required validation grade.

Standard
API 11D1, ISO 14310 where specified
Size range
Casing OD, weight and drift ID
Pressure / load
RFQ based
Model
Casing fit
Remark
Provide the exact casing program
View RFQ page
Production packers, bridge plugs, retainers and well completion accessories

Completion & Well Service

Casing Centralizers and Cable Protectors

Casing Centralizers and Cable Protectors for zonal isolation, production completion, remedial cementing, temporary plugging and well intervention, with quotation fields for casing size and weight, setting depth, differential pressure, temperature, setting method, retrievability, elastomer/fluid compatibility and required validation grade.

Standard
API 11D1, ISO 14310 where specified
Size range
Casing OD, weight and drift ID
Pressure / load
RFQ based
Model
Casing fit
Remark
Provide the exact casing program
View RFQ page
Casing scrapers, brush tools and debris-recovery tools arranged on inspection stands

Liner Hanger & Completion Accessories

Casing Scrapers and Wellbore Cleanout Tools

Casing Scrapers and Wellbore Cleanout Tools for mechanical removal and recovery of cement, scale, rust, debris and residual solids before completion equipment is installed. Review tubular interfaces, load and pressure envelopes, operating sequence, materials, validation and records before requesting a comparable quotation.

Standard
Project wellbore-cleanout program, compatible API tubular connections
Size range
Casing/liner ID, drift and restrictions
Pressure / load
RFQ based
Model
Tubular match
Bore
Tool OD, bypass and connection
Remark
Attach well schematic and restriction list
View RFQ page
Frac head, plug valve, hammer unions and high-pressure treating iron

Cementing & Fracturing Equipment

Cementing Equipment and Manifolds

Cementing Equipment and Manifolds for cementing, well stimulation, fracturing and high-pressure fluid routing, with quotation fields for working and test pressure, nominal size, union figure or flange, temperature, material, sour-service requirement, erosion allowance, flow direction and required NDT/test records.

Standard
API 6A, API 16C, API 7HU2 as applicable
Size range
RFQ based
Pressure / load
Working and test pressure
Model
Pressure duty
Remark
State both values and test medium
View RFQ page
Skid-mounted centrifugal drilling mud pumps with motors and flanged piping

Drilling Fluid Handling Equipment

Centrifugal Mud Pumps

Centrifugal Mud Pumps for transfer, charging, mixing and circulation service across drilling-fluid tanks and solids-control equipment. Review process duty, fluid properties, package interfaces, controls, testing and documentation before requesting a comparable quotation.

Standard
API Spec 7K system context, project pump datasheet
Size range
Suction conditions and NPSH available
Pressure / load
Rated and maximum flow/head
Model
Hydraulic point
Remark
Provide system curve where available
View RFQ page
Chemical injection skid with tanks, metering pumps, calibration pots and controls

Surface Production & Well Testing

Chemical Injection Skids

Chemical Injection Skids for metered injection of corrosion inhibitor, scale inhibitor, demulsifier, methanol, biocide and other production chemicals, with RFQ fields covering chemical name and safety data, required normal and maximum injection rate, discharge pressure, turndown, viscosity and temperature, tank capacity, duty and standby pumps, wetted materials, pulsation control, calibration pot, filtration, relief and return, leak containment, controls, hazardous area and climate.

Standard
Project process-piping, electrical and chemical-compatibility specification
Size range
Turndown and dosing accuracy
Pressure / load
Normal and maximum flow at discharge pressure
Model
Injection duty
Remark
Provide every chemical case and concentration
View RFQ page
Oilfield drilling and workover equipment prepared for project sourcing

RFQ Sourcing & Export Support

China Oilfield Equipment Sourcing

China Oilfield Equipment Sourcing for multi-line RFQ consolidation, drawing-based nonstandard parts and export-ready equipment packages, with quotation fields for clear line-item descriptions, standards and editions, quantities, target delivery, destination, required certificates, inspection plan, packing requirements and acceptable alternatives.

Standard
Buyer specification and destination requirements
Size range
RFQ based
Pressure / load
Datasheet, drawing or complete BOQ
Model
Technical package
Remark
One line item per required configuration
View RFQ page
High-pressure choke and kill manifold, valves and flowline components

Wellhead & Pressure Control

Choke and Kill Manifolds

Choke and Kill Manifolds for surface wellhead, production tree, pressure isolation and controlled flow, with quotation fields for rated working pressure, nominal bore, temperature class, material class, PSL/PR level, end connection and sour-service requirements.

Standard
API 6A, project specification
Size range
RFQ based
Pressure / load
2,000-20,000 psi, project dependent
Model
Pressure class
Remark
State the required working pressure
View RFQ page
Hydraulic power pack and operator control cabin for coiled tubing operations

Well Intervention & Coiled Tubing

Coiled Tubing Control Cabins and Power Packs

Coiled Tubing Control Cabins and Power Packs for hydraulic power, operator control, data acquisition and emergency shutdown for a coiled-tubing intervention spread, with RFQ fields covering connected injector and reel loads, required hydraulic pressure and flow, pump redundancy, prime mover, reservoir and cooling capacity, control functions, depth and load sensors, cabin layout, voltage, hazardous-area class, climate and offshore certification.

Standard
Project hydraulic, electrical and hazardous-area specification
Size range
Pump and reservoir capacity
Pressure / load
System pressure and simultaneous flow
Model
Hydraulic demand
Remark
Attach the complete function and duty schedule
View RFQ page
Coiled tubing injector head suspended on a service frame beside a reel

Well Intervention & Coiled Tubing

Coiled Tubing Injector Heads

Coiled Tubing Injector Heads for controlled running, pulling, snubbing and slow-speed positioning of coiled tubing through the well-control stack, with RFQ fields covering tubing OD range, continuous pull and snub capacity, traction system, minimum controllable speed, drive and brake redundancy, gooseneck radius, load measurement, stripper interface, lift frame and hazardous-area controls.

Standard
API 16B, API RP 16ST where specified
Size range
Minimum and maximum coiled-tubing OD
Pressure / load
RFQ based
Model
Tubing range
Remark
Identify gripper blocks and gooseneck radius
View RFQ page
Intervention pressure-control stack with rams, stripper and hydraulic panel

Well Intervention & Coiled Tubing

Coiled Tubing Pressure-Control Stacks

Coiled Tubing Pressure-Control Stacks for wellhead pressure containment and emergency isolation during coiled-tubing intervention, cleanout, milling and stimulation, with RFQ fields covering through-bore, working pressure, tubing size, quad or dual ram functions, shear requirement, stripper type, lubricator or riser length, quick unions or flanges, H2S and temperature service, control pressure, test boundary and lifting arrangement.

Standard
API 16B, API RP 16ST, project well-control specification
Size range
Through-bore and tubing range
Pressure / load
Working and test pressure
Model
Pressure envelope
Remark
Match the approved intervention pressure-control diagram
View RFQ page
Large coiled tubing reel with powered drive and levelwind mechanism

Well Intervention & Coiled Tubing

Coiled Tubing Reels and Levelwinds

Coiled Tubing Reels and Levelwinds for storage, transport, controlled spooling and deployment of continuous coiled-tubing strings, with RFQ fields covering tubing size and length, full reel mass, core and flange diameter, shaft load, reel drive torque, braking, levelwind travel, fleet compatibility, shipping envelope, lifting certification and offshore or land environment.

Standard
Project structural, lifting and transport specification
Size range
Core, flange and usable width
Pressure / load
Total shaft and tubing mass
Model
Reel capacity
Remark
Provide tubing OD, wall and required length
View RFQ page
Coiled tubing string wound on a transport reel beside intervention equipment

Well Intervention & Coiled Tubing

Coiled Tubing Strings

Coiled Tubing Strings for well cleanout, nitrogen lifting, acid stimulation, milling, logging conveyance and other continuous-pipe intervention operations, with RFQ fields covering outside diameter, wall thickness, total length, steel grade, yield strength, working pressure, ovality, bias weld spacing, sour-service condition, corrosion allowance, fatigue history and reel or shipping-spool limits.

Standard
API Spec 5ST, project fatigue and sour-service specification
Size range
OD, wall thickness and total length
Pressure / load
RFQ based
Model
Tubing geometry
Bore
Drift and ovality limits
Remark
State injector, reel and wellbore restrictions
View RFQ page
Tubing sliding sleeve with machined flow ports and shifting profile

Liner Hanger & Completion Accessories

Completion Sliding Sleeves

Completion Sliding Sleeves for downhole opening, closing or selective communication between tubing and annulus for circulation, production or stimulation. Review tubular interfaces, load and pressure envelopes, operating sequence, materials, validation and records before requesting a comparable quotation.

Standard
API Spec 19AC, project completion flow-control specification
Size range
Connection, drift and port area
Pressure / load
Pressure, rate and differential direction
Model
Tubing and flow
Remark
Provide production/stimulation duty cases
View RFQ page
Cutaway of corrosion-resistant alloy clad line pipe beside coated steel pipe

Pipeline Construction & Maintenance

CRA Clad and Lined Line Pipe

CRA Clad and Lined Line Pipe for corrosive oil, gas, produced-water and injection service requiring a carbon-steel load-bearing pipe with a corrosion-resistant internal layer, with RFQ fields covering base-pipe grade and dimensions, metallurgically clad or mechanically lined construction, CRA alloy and thickness, bonding or fit requirements, weld-overlay ends, sour service, pressure and temperature, corrosion study, forming route, dimensional tolerances, NDT, hydrotest, liner stability, welding procedure and qualification records.

Standard
API Spec 5LD, project corrosion-control specification
Size range
Base pipe OD/wall and CRA layer thickness
Pressure / load
RFQ based
Model
Composite construction
Bore
Clad or mechanically lined route
Remark
Identify load-bearing and corrosion-barrier basis
View RFQ page
Crown block assembly with multiple sheaves on an inspection stand

Rig Hoisting & Rotary Equipment

Crown Blocks

Crown Blocks for fixed upper sheave assembly transferring drilling-line loads into the mast or derrick crown structure, with RFQ fields covering rated load, number and diameter of sheaves, drilling-line diameter and construction, groove profile, bearing type, reeving pattern, fast-line and deadline orientation, frame dimensions, mounting and crown-beam interfaces, lubrication, guards, sensor or crown-protection interfaces, design temperature, NDT, load testing and inspection category.

Standard
API Spec 8C, API Spec 4F structural interfaces
Size range
Sheave count, diameter and groove
Pressure / load
Rated load and line-part arrangement
Model
Load path
Remark
Attach reeving calculation
View RFQ page
Parallel custody transfer meter runs with instruments, valves and flow computer cabinets

Oil Storage, Metering & Loading

Custody-Transfer Metering Skids

Custody-Transfer Metering Skids for fiscal or allocation measurement of liquid hydrocarbon transfers through one or more instrumented meter runs. Review process cases, metering or storage basis, safety functions, interfaces, approvals and test records before requesting a comparable quotation.

Standard
Applicable API MPMS chapters, ISO, OIML or local legal-metrology scope selected by project
Size range
Fluid properties, pressure and temperature
Pressure / load
Minimum, normal, maximum and upset rate
Model
Flow envelope
Remark
Provide operating cases and uncertainty budget
View RFQ page
Drilling jars, stabilizers, shock subs and fishing tools on workshop racks

Drilling & Downhole Tools

Custom Downhole Tools

Custom Downhole Tools for drillstring assembly, directional drilling, impact release, hole conditioning and fishing operations, with quotation fields for tool type, outside diameter, inside diameter, connection, fishing-neck size, tensile/torsional requirement, operating environment and requested inspection documents.

Standard
API 7-1, API 7-2 where applicable
Size range
Match hole and BHA program
Pressure / load
RFQ based
Model
Tool OD and bore
Remark
Provide restriction and drift limits
View RFQ page
Deadline anchor and mechanical weight indicator beside drilling line

Rig Hoisting & Rotary Equipment

Deadline Anchors and Weight Indicators

Deadline Anchors and Weight Indicators for secure termination of the drilling-line deadline and measurement of line tension for hook-load indication, with RFQ fields covering drilling-line diameter and construction, maximum deadline tension, anchor type and wrap arrangement, rated load, base and structural interface, load cell or hydraulic sensor, indicator range and accuracy, calibration method, data output, environmental rating, hazardous area, overload protection, mounting orientation, NDT, proof test and matching reeving geometry.

Standard
API Spec 8C interfaces, project load-indication specification
Size range
Line size and wrap arrangement
Pressure / load
Maximum deadline tension and rated load
Model
Anchor duty
Remark
Provide reeving and design-factor calculation
View RFQ page
Compact deoiling hydrocyclone vessels and piping on a produced-water treatment skid

Produced Water & Gas Treatment

Deoiling Hydrocyclone Packages

Deoiling Hydrocyclone Packages for bulk removal of dispersed oil from produced water using pressure-driven compact cyclonic separation, with RFQ fields covering minimum normal and maximum water rate, inlet oil concentration and droplet distribution, target outlet oil, pressure and temperature, available differential pressure, gas and solids content, water chemistry, turndown, liner quantity and material, erosion and corrosion basis, reject ratio, reject handling, instrumentation, sampling and performance test method.

Standard
Project produced-water treatment and pressure-piping specification
Size range
Oil, gas and solids loading
Pressure / load
Pressure, temperature and flow range
Model
Feed cases
Remark
Provide representative samples and variability
View RFQ page
Modular shale shaker, hydrocyclones, centrifuge and drilling mud tanks

Solids Control & Mud Systems

Desanders, Desilters and Mud Cleaners

Desanders, Desilters and Mud Cleaners for drilling-fluid screening, desanding, desilting, centrifugation, storage and recirculation, with quotation fields for required flow rate, fluid density and viscosity, cut point, screen designation, available power, hazardous-area classification, skid dimensions and discharge arrangement.

Standard
API RP 13C, project process specification
Size range
RFQ based
Pressure / load
Flow, density, viscosity and solids load
Model
Process duty
Remark
State normal and peak conditions
View RFQ page
Industrial diesel generator package with enclosed controls for remote oilfield power

Rig Power & Hazardous-Area Electrical

Diesel Generator Packages for Drilling and Production Sites

Diesel Generator Packages for Drilling and Production Sites for prime, standby and emergency power for drilling rigs, workover sites, camps and production facilities, with RFQ fields covering prime and standby rating, transient load steps, voltage, frequency, ambient, altitude, fuel quality, autonomy, day tank, starting system, enclosure, noise, emissions, switchgear, synchronization and transport limits.

Standard
ISO 8528, project electrical and environmental specification
Size range
Load steps and expected annual hours
Pressure / load
Prime, standby or continuous kW/kVA
Model
Rating and duty
Remark
Provide the complete electrical load schedule
View RFQ page
Differential pressure transmitter and multi-valve manifold

Instrumentation & Automation

Differential Pressure Transmitters

Differential pressure transmitters for flow, filter, vessel and level measurement. The cited FD3051S DP family spans 50 Pa to 3 MPa differential; static-pressure options are separate.

Standard
IEC, ISA instrument specification and project measurement practice
Size range
RFQ based
Pressure / load
50 Pa-40 MPa published family range
Model
Differential range
Remark
FD3051S DP family endpoints; select a sensor range code
View RFQ page
Oilfield drilling and workover equipment prepared for project sourcing

RFQ Sourcing & Export Support

Drawing-Based Custom Oilfield Tools

Drawing-Based Custom Oilfield Tools for multi-line RFQ consolidation, drawing-based nonstandard parts and export-ready equipment packages, with quotation fields for clear line-item descriptions, standards and editions, quantities, target delivery, destination, required certificates, inspection plan, packing requirements and acceptable alternatives.

Standard
Buyer specification and destination requirements
Size range
RFQ based
Pressure / load
Datasheet, drawing or complete BOQ
Model
Technical package
Remark
One line item per required configuration
View RFQ page
Drilling jars, stabilizers, shock subs and fishing tools on workshop racks

Drilling & Downhole Tools

Drill Collars and Heavy-Weight Drill Pipe

Drill Collars and Heavy-Weight Drill Pipe for drillstring assembly, directional drilling, impact release, hole conditioning and fishing operations, with quotation fields for tool type, outside diameter, inside diameter, connection, fishing-neck size, tensile/torsional requirement, operating environment and requested inspection documents.

Standard
API 7-1, API 7-2 where applicable
Size range
Match hole and BHA program
Pressure / load
RFQ based
Model
Tool OD and bore
Remark
Provide restriction and drift limits
View RFQ page
Casing, tubing, drill pipe and drill collars organized on pipe racks

OCTG & Tubular Handling

Drill Pipe

Drill Pipe for well construction, production tubing strings and drillstring components, with quotation fields for outside diameter, weight per length, grade, wall thickness, range, connection, drift, end finish, quantity, coating and mill documentation.

Standard
API 5CT, API 5DP, API 7-1 as applicable
Size range
OD, wall and nominal weight
Pressure / load
RFQ based
Model
Size and weight
Remark
Use the project tubular schedule
View RFQ page
Drill-pipe float valves, non-return valve inserts and matching tool-body components

Drilling & Downhole Tools

Drill-Pipe Float Valves and NRV Inserts

Drill-Pipe Float Valves and NRV Inserts for drillstring backflow prevention and pressure isolation during drilling and tripping operations, with RFQ fields covering valve style, outside diameter, landing shoulder or recess dimensions, flow area, pressure requirement, spring rating, seal material, temperature, erosion service and matching float-sub drawing.

Standard
API Spec 7NRV, matching drillstring component drawing
Size range
Flapper, plunger or project-specified design
Pressure / load
RFQ based
Model
Valve type
Remark
Identify the matching float sub or drillstring component
View RFQ page
Modular shale shaker, hydrocyclones, centrifuge and drilling mud tanks

Solids Control & Mud Systems

Drilling Fluid Decanter Centrifuges

Drilling Fluid Decanter Centrifuges for drilling-fluid screening, desanding, desilting, centrifugation, storage and recirculation, with quotation fields for required flow rate, fluid density and viscosity, cut point, screen designation, available power, hazardous-area classification, skid dimensions and discharge arrangement.

Standard
API RP 13C, project process specification
Size range
RFQ based
Pressure / load
Flow, density, viscosity and solids load
Model
Process duty
Remark
State normal and peak conditions
View RFQ page
High-shear drilling fluid pump package with electric motor and mixing piping

Drilling Fluid Handling Equipment

Drilling Fluid Shear Pumps

Drilling Fluid Shear Pumps for high-shear hydration and dispersion of polymers, clays and additives during drilling-fluid preparation. Review process duty, fluid properties, package interfaces, controls, testing and documentation before requesting a comparable quotation.

Standard
Project drilling-fluid mixing specification, API RP 13C system context
Size range
Additive and final fluid properties
Pressure / load
Batch volume, circulation rate and time
Model
Mixing duty
Remark
Provide the mud program and recipe
View RFQ page
Skid-mounted drilling fluid vacuum degasser connected to mud tanks and piping

Drilling Fluid Handling Equipment

Drilling Fluid Vacuum Degassers

Drilling Fluid Vacuum Degassers for removal of entrained gas from drilling fluid downstream of primary solids-control equipment. Review process duty, fluid properties, package interfaces, controls, testing and documentation before requesting a comparable quotation.

Standard
API RP 13C system context, project drilling-fluid specification
Size range
Mud density, viscosity and temperature
Pressure / load
Liquid rate and expected gas fraction
Model
Process duty
Remark
Provide the maximum upset condition
View RFQ page
Drilling jars, stabilizers, shock subs and fishing tools on workshop racks

Drilling & Downhole Tools

Drilling Jars and Shock Tools

Drilling Jars and Shock Tools for drillstring assembly, directional drilling, impact release, hole conditioning and fishing operations, with quotation fields for tool type, outside diameter, inside diameter, connection, fishing-neck size, tensile/torsional requirement, operating environment and requested inspection documents.

Standard
API 7-1, API 7-2 where applicable
Size range
Match hole and BHA program
Pressure / load
RFQ based
Model
Tool OD and bore
Remark
Provide restriction and drift limits
View RFQ page
Large reel of drilling wire rope beside hoisting blocks

Rig Hoisting & Rotary Equipment

Drilling Line and Wire Rope

Drilling Line and Wire Rope for reeved load transmission between the drawworks, crown block and traveling block in drilling and workover hoisting systems, with RFQ fields covering nominal diameter, construction and strand pattern, core type, steel grade, minimum breaking force, lay direction, compacted or rotation-resistant construction, sheave and drum D/d ratios, groove profile, fleet angle, design factor, temperature, corrosion, lubrication, total length, cut-and-slip program, ton-mile tracking, reel dimensions, end preparation and material certificate.

Standard
API Spec 9A, project drilling-line program
Size range
Diameter, strands, wires, core and lay
Pressure / load
Grade and minimum breaking force
Model
Rope construction
Remark
Match approved drilling-line specification
View RFQ page
Modular shale shaker, hydrocyclones, centrifuge and drilling mud tanks

Solids Control & Mud Systems

Drilling Mud Tank Systems

Drilling Mud Tank Systems for drilling-fluid screening, desanding, desilting, centrifugation, storage and recirculation, with quotation fields for required flow rate, fluid density and viscosity, cut point, screen designation, available power, hazardous-area classification, skid dimensions and discharge arrangement.

Standard
API RP 13C, project process specification
Size range
RFQ based
Pressure / load
Flow, density, viscosity and solids load
Model
Process duty
Remark
State normal and peak conditions
View RFQ page
Heavy drilling-rig drawworks skid with drum and brake assemblies

Rig Hoisting & Rotary Equipment

Drilling Rig Drawworks

Drilling Rig Drawworks for controlled hoisting and lowering of the drill string, casing and traveling assembly on drilling and workover rigs, with RFQ fields covering rated drilling depth and hook load, fast-line pull and speed, drilling-line size, drum and grooving, input power and transmission, service and emergency brakes, regenerative or dynamic braking, auxiliary braking, cooling, controls, crown and floor protection, spooling system, hazardous area, ambient conditions, skid interfaces, inspection category and replacement-spare scope.

Standard
API Spec 7K, API Spec 8C interfaces, project rig specification
Size range
Line size, drum and speed range
Pressure / load
Maximum hook load and fast-line pull
Model
Hoisting duty
Remark
Provide reeving and drilling program
View RFQ page
Land-rig mast and substructure modules laid out for assembly inspection

Rig Hoisting & Rotary Equipment

Drilling Rig Masts and Substructures

Drilling Rig Masts and Substructures for structural support of drilling hoisting, setback, rig-floor and well-center loads for mobile and conventional rigs, with RFQ fields covering rated hook and setback loads, simultaneous load cases, wind and seismic data, mast type and clear height, substructure floor height and wellhead clearance, raising method, transport module limits, crown and drawworks interfaces, racking-board loads, stairs and platforms, dropped-object control, welding class, material toughness, NDT, proof or function test, structural calculations and inspection category.

Standard
API Spec 4F, project structural and transport specification
Size range
Mast height and substructure clearance
Pressure / load
Hook, setback, wind and simultaneous cases
Model
Design loads
Remark
Provide rig equipment and environmental load list
View RFQ page
Mud pump fluid-end module, liners, pistons, valves, seats and springs

Mud Pump & Rig Spare Parts

Drilling Rig Spare Parts

Drilling Rig Spare Parts for triplex mud-pump maintenance, fluid-end overhaul and urgent replacement of wear components, with quotation fields for pump brand and model, part number, drawing revision, liner bore, piston style, valve and seat series, material, quantity and nameplate photographs.

Standard
OEM drawing, API 7K where applicable
Size range
RFQ based
Pressure / load
Brand, model and serial number
Model
Pump identification
Remark
Avoid ordering by appearance alone
View RFQ page
Calibrated drilling rig trip tank with level instruments and circulation piping

Drilling Fluid Handling Equipment

Drilling Rig Trip Tanks

Drilling Rig Trip Tanks for accurate monitoring of drilling-fluid gains and losses while tripping pipe or conducting well-control observations. Review process duty, fluid properties, package interfaces, controls, testing and documentation before requesting a comparable quotation.

Standard
API Std 53 operating context, project well-monitoring specification
Size range
Tank geometry and calibrated increments
Pressure / load
Usable volume and required resolution
Model
Volume monitoring
Remark
Define kick/loss detection objective
View RFQ page
Drilling jars, stabilizers, shock subs and fishing tools on workshop racks

Drilling & Downhole Tools

Drilling Stabilizers

Drilling Stabilizers for drillstring assembly, directional drilling, impact release, hole conditioning and fishing operations, with quotation fields for tool type, outside diameter, inside diameter, connection, fishing-neck size, tensile/torsional requirement, operating environment and requested inspection documents.

Standard
API 7-1, API 7-2 where applicable
Size range
Match hole and BHA program
Pressure / load
RFQ based
Model
Tool OD and bore
Remark
Provide restriction and drift limits
View RFQ page
Drilling swivel on a steel inspection stand beside rotary equipment

Rig Hoisting & Rotary Equipment

Drilling Swivels

Drilling Swivels for suspension of the rotating drill string while providing a pressure-containing passage for drilling fluid, with RFQ fields covering rated load, maximum working pressure, gooseneck and washpipe size, stem connection, bail dimensions, rotation speed, bearing arrangement, seal and packing system, drilling-fluid properties, temperature, lubrication, inspection category, pressure test, NDT, spare washpipe and packing scope and compatibility with hook, hose and kelly or drive system.

Standard
API Spec 8C, project circulating-system specification
Size range
Bore, washpipe and gooseneck
Pressure / load
Rated load and working pressure
Model
Load and pressure
Remark
Provide circulation and hook-load cases
View RFQ page
Drilling jars, stabilizers, shock subs and fishing tools on workshop racks

Drilling & Downhole Tools

Drilling Tools and BHA Components

Drilling Tools and BHA Components for drillstring assembly, directional drilling, impact release, hole conditioning and fishing operations, with quotation fields for tool type, outside diameter, inside diameter, connection, fishing-neck size, tensile/torsional requirement, operating environment and requested inspection documents.

Standard
API 7-1, API 7-2 where applicable
Size range
Match hole and BHA program
Pressure / load
RFQ based
Model
Tool OD and bore
Remark
Provide restriction and drift limits
View RFQ page
High-pressure hoses, oilfield cable, fasteners and wear components

Completion & Well Service

ESP and Logging Cables

ESP and Logging Cables for equipment maintenance, electrical completion, hydraulic control and drawing-based replacement, with quotation fields for part number or drawing, material, dimensions and tolerances, pressure or electrical rating, service temperature, quantity, traceability and acceptance testing.

Standard
Drawing, datasheet, applicable API and IEC requirements
Size range
RFQ based
Pressure / load
Part number, drawing and revision
Model
Identification
Remark
Attach photographs and dimensions for replacements
View RFQ page
Artificial-lift pumps, rods, couplings, ESP sections and gearbox components

Production & Artificial Lift

ESP Parts and Replacement Components

ESP Parts and Replacement Components for rod lift, ESP completion, surface pumping-unit maintenance and production optimization, with quotation fields for well depth, production rate, fluid properties, gas and solids content, temperature, tubing/casing geometry, installed equipment model and electrical data where applicable.

Standard
API 11B, API 11AX, project specification
Size range
RFQ based
Pressure / load
Depth, rate, viscosity, gas and solids
Model
Well and fluid data
Remark
Required for equipment sizing
View RFQ page
Explosion-protected motors, junction boxes, local controls, cable glands and LED luminaires

Rig Power & Hazardous-Area Electrical

Explosion-Proof Motors and Electrical Equipment

Explosion-Proof Motors and Electrical Equipment for motors, junction boxes, local control stations, cable glands, lighting and electrical distribution in classified drilling and production areas, with RFQ fields covering zone or class and division, gas or dust group, temperature class, equipment protection level, Ex protection concept, certificate scheme, ambient range, IP or NEMA rating, voltage, frequency, motor duty, enclosure material, cable entries and destination-country approval.

Standard
IEC 60079, IECEx or destination hazardous-location requirements
Size range
Gas or dust group and temperature class
Pressure / load
Zone/Class-Division and EPL
Model
Area classification
Remark
Use the project hazardous-area dossier
View RFQ page
Fixed-cutter PDC drill bits with different blade and cutter layouts

Drill Bits & Hole Enlargement

Fixed-Cutter PDC Drill Bits

Fixed-Cutter PDC Drill Bits for rotary and directional drilling in application-matched formations using fixed synthetic-diamond cutting structures, with RFQ fields covering hole size, interval and formation, compressive strength and abrasiveness, interbeds, expected ROP, bit durability target, BHA and rotary-steerable compatibility, blade count, cutter size and layout, gauge length, nozzle configuration, connection and planned hydraulics.

Standard
API Spec 7-1, IADC dull grading and drilling program
Size range
Hole size and formation interval
Pressure / load
RFQ based
Model
Application
Bore
Motor, RSS or rotary BHA
Remark
Provide offset bit records and dull grades
View RFQ page
Vertical flare knock-out drum with relief-gas piping and instruments

Produced Water & Gas Treatment

Flare Knock-Out Drum Systems

Flare Knock-Out Drum Systems for separation and collection of entrained liquids from relief and blowdown gas before the flare header or disposal system, with RFQ fields covering relief and depressuring cases, gas and liquid rates, composition, pressure and temperature, droplet-removal basis, surge volume, horizontal or vertical vessel, residence and disengagement criteria, liquid pumps, level controls, relief and venting, corrosion allowance, sour service, heat tracing, insulation, slug and low-temperature cases, plot constraints and disposal interfaces.

Standard
API Std 521, ASME BPVC Section VIII, project relief specification
Size range
Pressure, temperature and composition
Pressure / load
Gas and liquid rates by scenario
Model
Relief cases
Remark
Attach relief-load summary
View RFQ page
Production packers, bridge plugs, retainers and well completion accessories

Completion & Well Service

Float Shoes, Float Collars and Cementing Plugs

Float Shoes, Float Collars and Cementing Plugs for zonal isolation, production completion, remedial cementing, temporary plugging and well intervention, with quotation fields for casing size and weight, setting depth, differential pressure, temperature, setting method, retrievability, elastomer/fluid compatibility and required validation grade.

Standard
API 11D1, ISO 14310 where specified
Size range
Casing OD, weight and drift ID
Pressure / load
RFQ based
Model
Casing fit
Remark
Provide the exact casing program
View RFQ page
Forged steel gate globe and check valve bodies

Process Valves, Pumps & Compression

Forged-Steel Gate, Globe and Check Valves

Small-bore forged valves for oil, gas and process piping, with published manufacturing ranges of DN10-DN80, Class 150-2500 and -196 to 800 degrees C.

Standard
API 602, API 623, ASME B16.34 as applicable
Size range
Gate, globe, piston-check or swing-check
Pressure / load
Class 150-2500 published range
Model
Nominal size
Remark
Confirm size availability for the selected valve design
View RFQ page
Frac head, plug valve, hammer unions and high-pressure treating iron

Cementing & Fracturing Equipment

Frac Heads and Goat Heads

Frac Heads and Goat Heads for cementing, well stimulation, fracturing and high-pressure fluid routing, with quotation fields for working and test pressure, nominal size, union figure or flange, temperature, material, sour-service requirement, erosion allowance, flow direction and required NDT/test records.

Standard
API 6A, API 16C, API 7HU2 as applicable
Size range
RFQ based
Pressure / load
Working and test pressure
Model
Pressure duty
Remark
State both values and test medium
View RFQ page
High-pressure reciprocating pump package and replaceable fluid-end components

Cementing & Fracturing Equipment

Frac Pump Fluid Ends and Expendables

Frac Pump Fluid Ends and Expendables for high-pressure well-stimulation pumping and planned replacement of fluid ends, valves, seats, plungers, packing and related expendables, with RFQ fields covering pump make and model, input power, working pressure, plunger size, fluid-end configuration and material, valve and seat style, suction and discharge interfaces, proppant loading, duty cycle and traceability requirements.

Standard
OEM pump drawing, project pressure and fatigue specification
Size range
RFQ based
Pressure / load
Pump make, model and rated input power
Model
Pump match
Remark
Provide serial number and existing part references
View RFQ page
Industrial thermostat heating element and ceramic terminal components

Rig Power & Hazardous-Area Electrical

Hazardous-Area Thermostats and Heating Elements

Thermostats, temperature limiters and industrial heating components for oil and gas processing, including 20-125 degrees C controls and terminals rated to 650 degrees C.

Standard
IEC 60079, project hazardous-area and electrical specification
Size range
RFQ based
Pressure / load
Heater load and switching duty by project
Model
Electronic thermostat range
Remark
9VJAE published adjustable range
View RFQ page
Frac head, plug valve, hammer unions and high-pressure treating iron

Cementing & Fracturing Equipment

High-Pressure Flowline and Treating Iron

High-Pressure Flowline and Treating Iron for cementing, well stimulation, fracturing and high-pressure fluid routing, with quotation fields for working and test pressure, nominal size, union figure or flange, temperature, material, sour-service requirement, erosion allowance, flow direction and required NDT/test records.

Standard
API 6A, API 16C, API 7HU2 as applicable
Size range
RFQ based
Pressure / load
Working and test pressure
Model
Pressure duty
Remark
State both values and test medium
View RFQ page
High-pressure hoses, oilfield cable, fasteners and wear components

Completion & Well Service

High-Pressure Hose Assemblies

High-Pressure Hose Assemblies for equipment maintenance, electrical completion, hydraulic control and drawing-based replacement, with quotation fields for part number or drawing, material, dimensions and tolerances, pressure or electrical rating, service temperature, quantity, traceability and acceptance testing.

Standard
Drawing, datasheet, applicable API and IEC requirements
Size range
RFQ based
Pressure / load
Part number, drawing and revision
Model
Identification
Remark
Attach photographs and dimensions for replacements
View RFQ page
Frac head, plug valve, hammer unions and high-pressure treating iron

Cementing & Fracturing Equipment

High-Pressure Plug Valves

High-Pressure Plug Valves for cementing, well stimulation, fracturing and high-pressure fluid routing, with quotation fields for working and test pressure, nominal size, union figure or flange, temperature, material, sour-service requirement, erosion allowance, flow direction and required NDT/test records.

Standard
API 6A, API 16C, API 7HU2 as applicable
Size range
RFQ based
Pressure / load
Working and test pressure
Model
Pressure duty
Remark
State both values and test medium
View RFQ page
Fixed-blade hole openers and expandable underreamers on inspection stands

Drill Bits & Hole Enlargement

Hole Openers and Underreamers

Hole Openers and Underreamers for pilot-hole enlargement, casing-clearance creation and below-restriction underreaming in drilling and completion operations, with RFQ fields covering pilot and enlarged hole size, pass-through restriction, fixed or expandable design, activation method, cutter blocks, formation, gauge protection, flow and pressure drop, stabilizer arrangement, connection, BHA length, lost-circulation risk and retrieval contingency.

Standard
API rotary-shouldered connections, project enlargement program
Size range
Pilot, pass-through and enlarged diameters
Pressure / load
RFQ based
Model
Geometry
Bore
Fixed or expandable cutter arrangement
Remark
Confirm casing and wellhead restrictions
View RFQ page
Hot-tapping and line-stopping machines mounted on a pipeline test spool

Pipeline Construction & Maintenance

Hot-Tapping and Line-Stopping Equipment

Hot-Tapping and Line-Stopping Equipment for engineered live-line branch connection, isolation and maintenance work where the pipeline owner authorizes hot tapping or line stopping, with RFQ fields covering pipe size, wall, material and condition, product composition, pressure and temperature, flow, branch size and class, fitting type, tapping machine stroke and cutter, valve bore, line-stop head, plugging arrangement, bypass, reinforcement calculation, welding procedure, NDT, pressure test, excavation, lifting and contingency plan.

Standard
API RP 2201, ASME pipeline code and owner procedure
Size range
Pipe material, OD and remaining wall
Pressure / load
Pressure, temperature and flow
Model
Live-line basis
Remark
Attach integrity and operating assessment
View RFQ page
Hybrid drill bit combining fixed cutters and rolling cones

Drill Bits & Hole Enlargement

Hybrid Drill Bits

Hybrid Drill Bits for challenging interbedded, transitional or vibration-prone formations where combined rolling and shearing action is evaluated, with RFQ fields covering hole size, lithology and transitions, vibration history, directional objectives, cutter and cone arrangement, gauge design, expected WOB and RPM, flow and nozzle program, connection, motor or rotary-steerable compatibility and offset performance.

Standard
API Spec 7-1, application-specific drilling program
Size range
Interbeds, transitions and compressive strength
Pressure / load
RFQ based
Model
Formation challenge
Remark
Provide vibration and dysfunction observations
View RFQ page
Hydraulic catwalk and pipe conveyor arranged beside a land rig

Rig Hoisting & Rotary Equipment

Hydraulic Catwalks

Hydraulic Catwalks for mechanized transfer of drill pipe, casing and tubular tools between ground or pipe rack and the rig floor, with RFQ fields covering tubular OD, length and weight range, maximum single-joint load, rig-floor height and setback, trough and skate design, pickup arms, cycle time, hydraulic pressure and flow, independent or rig power, control stations, remote functions, interlocks, emergency lowering, transport envelope, lifting points, cold-weather package and interface drawings.

Standard
API Spec 7K, project pipe-handling and machinery-safety specification
Size range
OD, length and rig-floor height
Pressure / load
Maximum joint mass and cycle duty
Model
Tubular envelope
Remark
Provide tubular and tool schedule
View RFQ page
AI category illustration including a hydraulic power tong; not a specific model

OCTG & Tubular Handling

Hydraulic Power Tongs and Iron Roughnecks

Hydraulic Power Tongs and Iron Roughnecks for controlled makeup and breakout of drill pipe, casing and tubing connections, with RFQ fields covering tubular outside diameter, connection type, required makeup and breakout torque, speed, backup tong, jaw and die system, hydraulic pressure and flow, suspension or track interface and torque-turn recording.

Standard
API 7K where applicable, rig-floor interface specification
Size range
Pipe OD, coupling OD and connection family
Pressure / load
RFQ based
Model
Tubular range
Remark
Include every tubular handled on the job
View RFQ page
Horizontal induced-gas flotation vessel with pumps and instruments

Produced Water & Gas Treatment

Induced Gas Flotation Units

Induced Gas Flotation Units for polishing produced water by attaching fine gas bubbles to dispersed oil and suspended solids for surface removal, with RFQ fields covering water rate and composition, inlet and target oil-in-water, suspended solids, salinity, temperature, pressure, gas source and composition, flotation-cell arrangement, recycle ratio, chemical dosing, residence time, skimming and sludge handling, vessel code, metallurgy, hazardous area, instruments, control philosophy and test protocol.

Standard
ASME BPVC Section VIII where applicable, project water-quality specification
Size range
Oil, solids, salinity and temperature
Pressure / load
Minimum through peak water rate
Model
Water quality
Remark
Include upstream-treatment performance
View RFQ page
Metal-bodied in-line inspection tool beside pipeline cleaning pigs

Pipeline Construction & Maintenance

Intelligent Pipeline Inspection Tools

Intelligent Pipeline Inspection Tools for instrumented in-line inspection for metal loss, geometry, cracking, mapping or other integrity threats in piggable pipelines, with RFQ fields covering line size and ID range, wall thickness, material and seam type, product, pressure and temperature, bends and restrictions, valve bore, cleanliness, required inspection technology, anomaly types, probability of detection, sizing tolerance, speed range, run length, battery and data capacity, tracking, above-ground markers, validation digs and reporting format.

Standard
API Std 1163, project in-line inspection specification
Size range
ID range, wall, bends and restrictions
Pressure / load
RFQ based
Model
Piggability
Bore
Full-bore valves and launcher envelope
Remark
Provide route and feature survey
View RFQ page
Completion landing nipples and lock mandrels with polished seal bores

Liner Hanger & Completion Accessories

Landing Nipples and Lock Mandrels

Landing Nipples and Lock Mandrels for selective or no-go locating, locking and sealing of wireline-retrievable completion flow-control devices. Review tubular interfaces, load and pressure envelopes, operating sequence, materials, validation and records before requesting a comparable quotation.

Standard
API Spec 14L, project completion specification
Size range
Tubing connection, nipple profile and seal bore
Pressure / load
RFQ based
Model
Tubing and profile
Bore
Drift and tool-access restriction
Remark
Provide completion schematic and depth schedule
View RFQ page
Oil production manifold with multiple valve branches and a metering skid connection

Oil Storage, Metering & Loading

Lease and Production Manifolds

Lease and Production Manifolds for selection, routing, isolation and commingling of well, test, tank, pipeline or loading streams at production facilities. Review process cases, metering or storage basis, safety functions, interfaces, approvals and test records before requesting a comparable quotation.

Standard
API Spec 6A or API Spec 6D components as applicable, project piping specification
Size range
Branches, headers and line classes
Pressure / load
Flow, pressure and operating scenarios
Model
Process routing
Remark
Attach process flow and valve lineup
View RFQ page
Lease automatic custody transfer skid with meter runs, controls and sampling equipment

Oil Storage, Metering & Loading

Lease Automatic Custody Transfer (LACT) Units

Lease Automatic Custody Transfer (LACT) Units for automatic measurement, sampling, quality checking and transfer of stabilized crude oil from lease storage into a pipeline or transport system. Review process cases, metering or storage basis, safety functions, interfaces, approvals and test records before requesting a comparable quotation.

Standard
Applicable API MPMS chapters, contract and legal-metrology requirements
Size range
Crude properties and operating pressure
Pressure / load
Min/normal/max flow and batch size
Model
Measurement duty
Remark
Provide custody contract and uncertainty target
View RFQ page
Modular shale shaker, hydrocyclones, centrifuge and drilling mud tanks

Solids Control & Mud Systems

Linear-Motion Shale Shakers

Linear-Motion Shale Shakers for drilling-fluid screening, desanding, desilting, centrifugation, storage and recirculation, with quotation fields for required flow rate, fluid density and viscosity, cut point, screen designation, available power, hazardous-area classification, skid dimensions and discharge arrangement.

Standard
API RP 13C, project process specification
Size range
RFQ based
Pressure / load
Flow, density, viscosity and solids load
Model
Process duty
Remark
State normal and peak conditions
View RFQ page
Liner hanger system bodies with slips and machined connections on inspection stands

Liner Hanger & Completion Accessories

Liner Hanger Systems

Liner Hanger Systems for suspension of a liner string from the parent casing while maintaining required bore and load capacity. Review tubular interfaces, load and pressure envelopes, operating sequence, materials, validation and records before requesting a comparable quotation.

Standard
API Spec 19LH, project well-completion specification
Size range
Parent casing and liner OD/weight/grade
Pressure / load
Liner suspended load and load cases
Model
Casing and liner match
Remark
Attach full casing and liner program
View RFQ page
Liner running and setting tool assemblies with release mechanisms on workshop stands

Liner Hanger & Completion Accessories

Liner Running and Setting Tools

Liner Running and Setting Tools for running, setting, cementing, releasing and retrieving liner-hanger assemblies on drillpipe or workstring. Review tubular interfaces, load and pressure envelopes, operating sequence, materials, validation and records before requesting a comparable quotation.

Standard
API Spec 19LH system interfaces, project running-tool procedure
Size range
Workstring and liner-hanger interfaces
Pressure / load
Tension, compression and torque envelope
Model
Mechanical capacity
Remark
Provide running loads and torque/drag model
View RFQ page
Liner-top packer assembly with sealing elements and polished setting sleeve

Liner Hanger & Completion Accessories

Liner-Top Packers

Liner-Top Packers for annular sealing at the liner top after cementing and liner-hanger setting. Review tubular interfaces, load and pressure envelopes, operating sequence, materials, validation and records before requesting a comparable quotation.

Standard
API Spec 19LH system context, project liner-completion specification
Size range
Casing ID, packer OD and through bore
Pressure / load
Differential pressure and direction
Model
Seal envelope
Remark
Provide casing drift and wear history
View RFQ page
Articulated marine loading arms with swivel joints at an oil terminal jetty

Oil Storage, Metering & Loading

Marine Loading Arms

Marine Loading Arms for articulated transfer of crude oil or hydrocarbon products between terminal piping and vessel manifolds. Review process cases, metering or storage basis, safety functions, interfaces, approvals and test records before requesting a comparable quotation.

Standard
Project marine-terminal specification, applicable OCIMF, piping and local port requirements
Size range
Product, line size and piping class
Pressure / load
Flow, pressure and emergency cases
Model
Transfer duty
Remark
Provide hydraulic and surge calculations
View RFQ page
Compact meter prover connection beside a liquid custody transfer metering skid

Oil Storage, Metering & Loading

Meter Prover Systems

Meter Prover Systems for on-site determination of liquid meter factors using pipe, small-volume, compact or master-meter proving methods. Review process cases, metering or storage basis, safety functions, interfaces, approvals and test records before requesting a comparable quotation.

Standard
Applicable API MPMS proving chapters, contract and legal-metrology requirements
Size range
Meter types, sizes and fluid properties
Pressure / load
Flow range, repeatability and uncertainty
Model
Proving envelope
Remark
Provide proving frequency and contract criteria
View RFQ page
Twin molecular-sieve dehydration vessels with regeneration piping

Produced Water & Gas Treatment

Molecular Sieve Dehydration Units

Molecular Sieve Dehydration Units for deep dehydration of natural gas or hydrocarbon streams for cryogenic, LNG, NGL recovery or stringent downstream water specifications, with RFQ fields covering feed composition and rate, pressure and temperature, inlet and outlet water content, contaminants, adsorbent type, bed diameter and depth, cycle time, number of beds, regeneration gas source and rate, heating and cooling duty, switching valves, dust filtration, pressure-drop limit, thermal transients, vessel internals, metallurgy, controls and adsorbent life basis.

Standard
ASME BPVC Section VIII, project adsorption-system specification
Size range
Water and contaminant loading
Pressure / load
Pressure, temperature and gas rate
Model
Feed and target
Remark
State required outlet water specification
View RFQ page
Venturi mud mixing hopper integrated with centrifugal pumps and piping

Drilling Fluid Handling Equipment

Mud Mixing Hoppers

Mud Mixing Hoppers for controlled induction of powdered and liquid additives into a recirculating drilling-fluid stream. Review process duty, fluid properties, package interfaces, controls, testing and documentation before requesting a comparable quotation.

Standard
API RP 13C system context, project drilling-fluid mixing specification
Size range
Powder or liquid additive properties
Pressure / load
Liquid rate, pressure and additive feed rate
Model
Induction duty
Remark
Provide expected sacks per hour
View RFQ page
Positive-displacement mud motors and replaceable power sections with protected connections

Drilling & Downhole Tools

Mud Motors and Power Sections

Mud Motors and Power Sections for directional drilling, slide drilling and performance drilling with positive-displacement downhole motors, with RFQ fields covering tool outside diameter, lobe and stage configuration, bend setting, flow range, pressure drop, output torque and speed, elastomer, operating temperature, bit connection and top connection.

Standard
API rotary-shouldered connections, directional drilling program
Size range
OD, length, bend and stabilizer arrangement
Pressure / load
RFQ based
Model
Tool geometry
Bore
Top and bit connections
Remark
Check BHA clearance and planned hole size
View RFQ page
AI category illustration of a mud-pump liner, piston, valve, seat and spring; not a specific model

Mud Pump & Rig Spare Parts

Mud Pump Spare Parts

Mud Pump Spare Parts for triplex mud-pump maintenance, fluid-end overhaul and urgent replacement of wear components, with quotation fields for pump brand and model, part number, drawing revision, liner bore, piston style, valve and seat series, material, quantity and nameplate photographs.

Standard
OEM drawing, API 7K where applicable
Size range
RFQ based
Pressure / load
Brand, model and serial number
Model
Pump identification
Remark
Avoid ordering by appearance alone
View RFQ page
Top-mounted mud tank agitators with geared motors above a steel tank

Drilling Fluid Handling Equipment

Mud Tank Agitators

Mud Tank Agitators for suspension of weighting material and maintenance of uniform drilling-fluid properties in active and reserve tanks. Review process duty, fluid properties, package interfaces, controls, testing and documentation before requesting a comparable quotation.

Standard
API RP 13C system context, project tank-agitation specification
Size range
Dimensions, density, viscosity and solids
Pressure / load
Working volume and mixing objective
Model
Tank and fluid
Remark
Attach tank internal drawing
View RFQ page
Vertical mud gas separator with vent and liquid outlet piping at a drilling site

Drilling Fluid Handling Equipment

Mud-Gas Separators (Poor Boy Degassers)

Mud-Gas Separators (Poor Boy Degassers) for separation and controlled routing of large gas volumes from returned drilling fluid during well-control circulation. Review process duty, fluid properties, package interfaces, controls, testing and documentation before requesting a comparable quotation.

Standard
API Std 53 and API Spec 16C system interfaces, project well-control specification
Size range
Pressure, temperature and mud properties
Pressure / load
Maximum gas and liquid rates
Model
Two-phase duty
Remark
Provide well-control hydraulic cases
View RFQ page
Multiphase flowmeter spool with pressure and temperature instruments on a skid

Surface Production & Well Testing

Multiphase Flow Metering Skids

Multiphase Flow Metering Skids for real-time measurement of combined oil, gas and water rates without full phase separation for well testing and production surveillance, with RFQ fields covering line size, pressure and temperature, total flow envelope, gas volume fraction, water cut, fluid density and PVT data, salinity, viscosity, sand, flow regime, turndown, target uncertainty, meter technology, calibration, sampling, communications, hazardous area and data integration.

Standard
Project metering-performance and hazardous-area specification
Size range
GVF, water cut and phase properties
Pressure / load
Minimum and maximum total rate
Model
Flow envelope
Remark
Provide PVT and expected flow-regime data
View RFQ page
MWD and LWD collars, sensor modules, pulsers and downhole electronics

Drilling & Downhole Tools

MWD and LWD Tools

MWD and LWD Tools for drillstring assembly, directional drilling, impact release, hole conditioning and fishing operations, with quotation fields for tool type, outside diameter, inside diameter, connection, fishing-neck size, tensile/torsional requirement, operating environment and requested inspection documents.

Standard
API 7-1, API 7-2 where applicable
Size range
Match hole and BHA program
Pressure / load
RFQ based
Model
Tool OD and bore
Remark
Provide restriction and drift limits
View RFQ page
Natural gas generator package with radiator and control enclosure

Rig Power & Hazardous-Area Electrical

Natural-Gas Generator Sets for Oilfields

Gas generator packages for associated gas, wellhead gas and treated fuel gas, with public reference power bands from 10 to 1500 kW and custom paralleling above 500 kW.

Standard
ISO 8528, project electrical, emissions and fuel-gas specification
Size range
Voltage, frequency, phases and power factor
Pressure / load
10-1500 kW published portfolio
Model
Published power portfolio
Remark
Final output depends on gas and site derating
View RFQ page
Stainless steel needle valves and multi-valve instrument manifold blocks

Process Valves, Pumps & Compression

Needle Valves and Instrument Manifolds

Needle Valves and Instrument Manifolds for instrument isolation, equalization, bleed, calibration and impulse-line service around pressure and differential-pressure instruments, with RFQ fields covering valve or manifold arrangement, port size and thread, pressure and temperature, flow coefficient or orifice, body and trim material, stem tip, packing, mounting pattern, sour service, fire safety and cleanliness requirements.

Standard
ASME B31.3, project instrument and piping specification
Size range
Needle valve or 2-, 3- or 5-valve manifold
Pressure / load
RFQ based
Model
Configuration
Bore
Instrument and process port pattern
Remark
Attach transmitter mounting and impulse-line details
View RFQ page
Casing, tubing, drill pipe and drill collars organized on pipe racks

OCTG & Tubular Handling

OCTG Casing and Tubing

OCTG Casing and Tubing for well construction, production tubing strings and drillstring components, with quotation fields for outside diameter, weight per length, grade, wall thickness, range, connection, drift, end finish, quantity, coating and mill documentation.

Standard
API 5CT, API 5DP, API 7-1 as applicable
Size range
OD, wall and nominal weight
Pressure / load
RFQ based
Model
Size and weight
Remark
Use the project tubular schedule
View RFQ page
Industrial pressure transmitter with manifold and process connection

Instrumentation & Automation

Oil and Gas Pressure Transmitters

Pressure transmitters for wellheads, process skids and production facilities, with published reference ranges from 5 kPa to 260 MPa and selectable analog or digital outputs.

Standard
IEC, ISA instrument specification and project hazardous-area requirements
Size range
RFQ based
Pressure / load
5 kPa-260 MPa published family range
Model
Family pressure range
Remark
Select a calibrated span with suitable turndown
View RFQ page
Oil truck loading skid with articulated top loading arm and contained piping

Oil Storage, Metering & Loading

Oil Truck Loading Skids

Oil Truck Loading Skids for controlled metering and top or bottom loading of crude oil or refined hydrocarbon liquids into road tankers. Review process cases, metering or storage basis, safety functions, interfaces, approvals and test records before requesting a comparable quotation.

Standard
Applicable API MPMS, local terminal, fire and legal-metrology requirements
Size range
Product properties and tanker range
Pressure / load
Rate, batch size, bays and simultaneous loads
Model
Loading duty
Remark
Provide fleet connection and height data
View RFQ page
Oilfield drilling and workover equipment prepared for project sourcing

RFQ Sourcing & Export Support

Oilfield Equipment Sourcing for Middle East Projects

Oilfield Equipment Sourcing for Middle East Projects for multi-line RFQ consolidation, drawing-based nonstandard parts and export-ready equipment packages, with quotation fields for clear line-item descriptions, standards and editions, quantities, target delivery, destination, required certificates, inspection plan, packing requirements and acceptable alternatives.

Standard
Buyer specification and destination requirements
Size range
RFQ based
Pressure / load
Datasheet, drawing or complete BOQ
Model
Technical package
Remark
One line item per required configuration
View RFQ page
Drilling jars, stabilizers, shock subs and fishing tools on workshop racks

Drilling & Downhole Tools

Oilfield Fishing Tools

Oilfield Fishing Tools for drillstring assembly, directional drilling, impact release, hole conditioning and fishing operations, with quotation fields for tool type, outside diameter, inside diameter, connection, fishing-neck size, tensile/torsional requirement, operating environment and requested inspection documents.

Standard
API 7-1, API 7-2 where applicable
Size range
Match hole and BHA program
Pressure / load
RFQ based
Model
Tool OD and bore
Remark
Provide restriction and drift limits
View RFQ page
Pressure, differential pressure, temperature, flow and level instruments

Instrumentation & Automation

Oilfield Flow Meters

Oilfield Flow Meters for wellsite, production-facility and process-skid pressure, differential pressure, temperature, flow and level measurement, with quotation fields for measured variable, calibrated range, accuracy, process connection, wetted materials, temperature, output protocol, power supply, enclosure rating and hazardous-area certification required by the project.

Standard
IEC, ISA, project instrument specification
Size range
RFQ based
Pressure / load
Application-specific calibrated span
Model
Measurement range
Remark
State normal, minimum and maximum values
View RFQ page
Frac head, plug valve, hammer unions and high-pressure treating iron

Cementing & Fracturing Equipment

Oilfield Hammer Unions

Oilfield Hammer Unions for cementing, well stimulation, fracturing and high-pressure fluid routing, with quotation fields for working and test pressure, nominal size, union figure or flange, temperature, material, sour-service requirement, erosion allowance, flow direction and required NDT/test records.

Standard
API 6A, API 16C, API 7HU2 as applicable
Size range
RFQ based
Pressure / load
Working and test pressure
Model
Pressure duty
Remark
State both values and test medium
View RFQ page
Pressure, differential pressure, temperature, flow and level instruments

Instrumentation & Automation

Oilfield Process Control Systems

Oilfield Process Control Systems for wellsite, production-facility and process-skid pressure, differential pressure, temperature, flow and level measurement, with quotation fields for measured variable, calibrated range, accuracy, process connection, wetted materials, temperature, output protocol, power supply, enclosure rating and hazardous-area certification required by the project.

Standard
IEC, ISA, project instrument specification
Size range
RFQ based
Pressure / load
Application-specific calibrated span
Model
Measurement range
Remark
State normal, minimum and maximum values
View RFQ page
High-pressure hoses, oilfield cable, fasteners and wear components

Completion & Well Service

PDC Cutters and Carbide Wear Parts

PDC Cutters and Carbide Wear Parts for equipment maintenance, electrical completion, hydraulic control and drawing-based replacement, with quotation fields for part number or drawing, material, dimensions and tolerances, pressure or electrical rating, service temperature, quantity, traceability and acceptance testing.

Standard
Drawing, datasheet, applicable API and IEC requirements
Size range
RFQ based
Pressure / load
Part number, drawing and revision
Model
Identification
Remark
Attach photographs and dimensions for replacements
View RFQ page
Machined PEEK backup rings valve seats and engineering polymer stock shapes

Completion & Well Service

PEEK and PAI Components for Oil and Gas Service

PEEK and PAI stock shapes and machined components for seals, backup rings, valve seats and electrical connectors, with published PEEK service data to 300 degrees C.

Standard
NORSOK M-710 where grade-specific test evidence is required, ASTM material test methods
Size range
300 degrees C short term
Pressure / load
Component rating depends on geometry and service
Model
Natural PEEK temperature
Remark
Part design and environment may reduce these limits
View RFQ page
Skid-mounted pipeline pig launcher and receiver with quick-opening closures

Pipeline Construction & Maintenance

Pig Launchers and Receivers

Pig Launchers and Receivers for safe insertion and removal of cleaning, batching, gauging and in-line inspection pigs from pressurized pipeline systems, with RFQ fields covering main-line size and schedule, design pressure and temperature, pig size and length, barrel and reducer geometry, closure type and interlock, kicker, equalizing, drain and vent connections, isolation valves, corrosion allowance, sour service, handling system, supports, relief, instrumentation, code stamping and site layout.

Standard
ASME pressure-vessel and piping codes, project pigging specification
Size range
Line size, wall and pig envelope
Pressure / load
Design pressure and temperature
Model
Pipeline match
Remark
Attach line class and pig datasheet
View RFQ page
Automated pipe-racking arms and setback structure at a land drilling rig

Rig Hoisting & Rotary Equipment

Pipe Racking Systems

Pipe Racking Systems for mechanized movement and storage of drill pipe, stands, casing and bottom-hole assemblies between well center and setback, with RFQ fields covering tubular and stand size, length and weight, setback capacity, vertical or horizontal racking concept, manipulator reach and load, gripper design, cycle time, mast and rig-floor interfaces, hydraulic and electric utilities, control mode, anti-collision zones, redundancy, emergency recovery, hazardous area, cold-weather duty and integration with top drive, elevators and catwalk.

Standard
API Spec 7K, API Spec 4F interfaces, project machinery-safety specification
Size range
OD, length and setback capacity
Pressure / load
Maximum stand and tool load
Model
Handling scope
Remark
Provide full tubular program
View RFQ page
Large forged pipeline bends and flanges in a clean fabrication shop

Pipeline Construction & Maintenance

Pipeline Bends, Fittings and Flanges

Pipeline Bends, Fittings and Flanges for pipeline tie-ins, stations, launchers, receivers, manifolds and above-ground pressure-piping assemblies, with RFQ fields covering component type, nominal size, schedule or wall thickness, pressure class, material grade, seamless or welded route, bend radius and angle, tangent length, dimensional standard, end preparation, corrosion allowance, sour service, impact testing, heat treatment, NDT, coating and matching pipe data.

Standard
ASME B16 series, MSS and project piping specification
Size range
Size, wall, class, radius and angle
Pressure / load
RFQ based
Model
Geometry
Bore
Butt-weld, flanged or special end
Remark
Attach isometric and matching pipe schedule
View RFQ page
Polyurethane disc, cup and brush cleaning pigs arranged for inspection

Pipeline Construction & Maintenance

Pipeline Cleaning Pigs

Pipeline Cleaning Pigs for dewatering, liquid displacement, batching, wax or scale removal, debris cleaning and pre-inspection pipeline conditioning, with RFQ fields covering pipeline ID and wall transitions, length, bends, tees, valves and restrictions, product and deposits, cleaning objective, cup or disc configuration, foam or mandrel design, brush or magnet modules, bypass, differential pressure, bidirectional duty, tracking, wear allowance, chemical compatibility and receiving constraints.

Standard
Project pigging and pipeline-integrity procedure
Size range
Minimum and maximum ID plus restrictions
Pressure / load
RFQ based
Model
Pipeline geometry
Bore
Bends, tees, valves and branches
Remark
Attach the pipeline feature list
View RFQ page
Vertical filter separator package beside pipeline components

Pipeline Construction & Maintenance

Pipeline Filter Separators and Strainers

Pipeline Filter Separators and Strainers for removal of solids and entrained liquids from gas or liquid pipeline streams upstream of metering, compression, pumping and process equipment, with RFQ fields covering fluid composition, minimum normal and maximum flow, pressure and temperature, particle and liquid loading, target removal efficiency, allowable pressure drop, vessel orientation, filter or coalescer elements, clean and dirty differential pressure, drain system, corrosion allowance, sour service, relief, instruments, access and element replacement clearance.

Standard
ASME BPVC Section VIII and project filtration specification
Size range
Solids and liquid loading
Pressure / load
Pressure, temperature and flow range
Model
Process cases
Remark
Provide startup, normal and upset cases
View RFQ page
Pressure, differential pressure, temperature, flow and level instruments

Instrumentation & Automation

Process Level Transmitters

Process level transmitter selection using the FD86T pressure-guided example. Keep water-head range, operating temperature, enclosure protection and electrical interface distinct when preparing a tank or vessel RFQ.

Standard
IEC, ISA, project instrument specification
Size range
0-1 to 0-200 mH2O
Pressure / load
See FD86T water-head range options; installation-specific calibration required
Model
FD86T / water-head range options
Remark
Normalized from the manufacturer's 0-1m to 200mH2O notation; refer to its selection table. Not a universal process-liquid depth rating.
View RFQ page
High-pressure produced-water injection pump and motor on a process skid

Produced Water & Gas Treatment

Produced Water Injection Pump Skids

Produced Water Injection Pump Skids for pressurization of treated produced water for reservoir injection, disposal or pressure-support service, with RFQ fields covering minimum normal and maximum flow, suction conditions, required discharge pressure, water composition and solids, temperature, vapor pressure, pump type, stages, NPSH margin, materials, corrosion and erosion allowance, seal or packing plan, driver power and voltage, variable speed, duty and standby philosophy, pulsation control, minimum-flow recycle, instruments and performance test.

Standard
API 610 or API 674 as selected, project injection-pump specification
Size range
Flow range and NPSH available
Pressure / load
Suction and discharge pressure
Model
Hydraulic duty
Remark
Provide system curve and wellhead cases
View RFQ page
Production packers, bridge plugs, retainers and well completion accessories

Completion & Well Service

Production Packers

Production Packers for zonal isolation, production completion, remedial cementing, temporary plugging and well intervention, with quotation fields for casing size and weight, setting depth, differential pressure, temperature, setting method, retrievability, elastomer/fluid compatibility and required validation grade.

Standard
API 11D1, ISO 14310 where specified
Size range
Casing OD, weight and drift ID
Pressure / load
RFQ based
Model
Casing fit
Remark
Provide the exact casing program
View RFQ page
Positive-displacement pump and process valve equipment prepared for oilfield service

Process Valves, Pumps & Compression

Progressive Cavity Pumps for Oilfield Service

Progressive Cavity Pumps for Oilfield Service for viscous crude, produced fluids, sludge, polymers and multiphase liquids where a low-shear positive-displacement pump is suitable, with RFQ fields covering required flow, differential pressure, viscosity curve, solids size and concentration, gas content, inlet pressure, temperature, stator elastomer compatibility, rotor material, speed, drive, seal, connections and installation orientation.

Standard
API 676 where specified, project process datasheet
Size range
Viscosity across operating temperature
Pressure / load
Rated flow and differential pressure
Model
Process duty
Remark
Provide minimum, normal and maximum conditions
View RFQ page
Artificial-lift pumps, rods, couplings, ESP sections and gearbox components

Production & Artificial Lift

Pumping Unit and Pump Jack Parts

Pumping Unit and Pump Jack Parts for rod lift, ESP completion, surface pumping-unit maintenance and production optimization, with quotation fields for well depth, production rate, fluid properties, gas and solids content, temperature, tubing/casing geometry, installed equipment model and electrical data where applicable.

Standard
API 11B, API 11AX, project specification
Size range
RFQ based
Pressure / load
Depth, rate, viscosity, gas and solids
Model
Well and fluid data
Remark
Required for equipment sizing
View RFQ page
Ram and annular blowout preventers arranged with a hydraulic well-control package

Wellhead & Pressure Control

Ram and Annular Blowout Preventers

Ram and Annular Blowout Preventers for surface or land-rig well-control stacks requiring pipe, blind, shear or variable-bore ram functions and annular sealing, with RFQ fields covering BOP type, nominal bore, rated working pressure, ram configuration, closing ratio, flange or hub interface, temperature class, material service and required validation level.

Standard
API 16A, project well-control specification
Size range
Nominal bore and mating flange or hub
Pressure / load
Project-defined working and test pressure
Model
Bore and pressure
Remark
Match the approved well-control stack drawing
View RFQ page
Reaming shoes and casing-drilling bits with cutting and drill-out structures

Drill Bits & Hole Enlargement

Reaming Shoes and Casing-Drilling Bits

Reaming Shoes and Casing-Drilling Bits for casing or liner deployment through unstable, ledged or restricted hole and selected drill-in or drill-out installation programs, with RFQ fields covering casing or liner size and weight, shoe OD and drift, connection, cutting structure, ream-ahead or drill-through requirement, formation, cement compatibility, internal profile, drill-out material, circulation ports, torque and pressure limits and float-equipment interface.

Standard
Project casing and liner installation specification
Size range
Casing or liner OD, weight and connection
Pressure / load
RFQ based
Model
Tubular match
Bore
Shoe drift and internal profile
Remark
Attach the casing string and landing program
View RFQ page
Large rotary table and master bushing prepared for rig installation

Rig Hoisting & Rotary Equipment

Rotary Tables and Master Bushings

Rotary Tables and Master Bushings for rotary drive, tubular suspension and transfer of torque through the rig floor where a conventional rotary table is required, with RFQ fields covering table opening, static and rotating load ratings, maximum torque and speed, gear ratio, drive arrangement, deck height and footprint, master and split bushing type, kelly-bushing interface, casing-bushing compatibility, lubrication, cooling, guards, braking or lock, controls, hazardous area and matching rig-floor drawings.

Standard
API Spec 7K, project rotary-system specification
Size range
Opening, height and speed range
Pressure / load
Static load, rotating load and torque
Model
Table capacity
Remark
Provide casing and drill-string program
View RFQ page
Modular shale shaker, hydrocyclones, centrifuge and drilling mud tanks

Solids Control & Mud Systems

Shale Shaker Screens

Shale Shaker Screens for drilling-fluid screening, desanding, desilting, centrifugation, storage and recirculation, with quotation fields for required flow rate, fluid density and viscosity, cut point, screen designation, available power, hazardous-area classification, skid dimensions and discharge arrangement.

Standard
API RP 13C, project process specification
Size range
RFQ based
Pressure / load
Flow, density, viscosity and solids load
Model
Process duty
Remark
State normal and peak conditions
View RFQ page
Side-pocket gas-lift mandrel with offset valve pocket and tubing connections

Liner Hanger & Completion Accessories

Side-Pocket Gas-Lift Mandrels

Side-Pocket Gas-Lift Mandrels for installation and wireline retrieval of gas-lift valves in an offset pocket while retaining tubing through bore. Review tubular interfaces, load and pressure envelopes, operating sequence, materials, validation and records before requesting a comparable quotation.

Standard
API Spec 19G1, project gas-lift completion specification
Size range
Connection, mandrel OD, drift and casing ID
Pressure / load
RFQ based
Model
Tubing and clearance
Bore
Pocket and gas-lift valve size
Remark
Provide completion geometry and deviation survey
View RFQ page
Spool of reinforced composite line pipe beside steel pipeline materials

Pipeline Construction & Maintenance

Spoolable Reinforced Plastic Line Pipe

Spoolable Reinforced Plastic Line Pipe for rapidly installed gathering, water transfer, injection and corrosive-service flowlines where spoolable composite pipe is technically suitable, with RFQ fields covering nominal size, bore, pressure rating, temperature envelope, conveyed fluids, gas permeation, liner and reinforcement materials, chemical compatibility, minimum bend radius, reel dimensions and mass, fitting system, pull and crush loads, UV and fire exposure, installation method, inspection, qualification and repair philosophy.

Standard
API Spec 15S, project flexible-pipe specification
Size range
Nominal size, bore and wall construction
Pressure / load
Working pressure and temperature
Model
Service envelope
Remark
Provide complete fluid composition
View RFQ page
Stage cementing collar with circulation ports and casing connections on an inspection bench

Liner Hanger & Completion Accessories

Stage Cementing Collars

Stage Cementing Collars for controlled opening and closing of casing ports for multi-stage primary cementing operations. Review tubular interfaces, load and pressure envelopes, operating sequence, materials, validation and records before requesting a comparable quotation.

Standard
API Spec 10D, project casing and cementing specification
Size range
Casing OD, weight, grade and connection
Pressure / load
Burst, collapse and axial requirements
Model
Casing match
Remark
Match approved casing design
View RFQ page
Artificial-lift pumps, rods, couplings, ESP sections and gearbox components

Production & Artificial Lift

Sucker Rod Pumps

Sucker Rod Pumps for rod lift, ESP completion, surface pumping-unit maintenance and production optimization, with quotation fields for well depth, production rate, fluid properties, gas and solids content, temperature, tubing/casing geometry, installed equipment model and electrical data where applicable.

Standard
API 11B, API 11AX, project specification
Size range
RFQ based
Pressure / load
Depth, rate, viscosity, gas and solids
Model
Well and fluid data
Remark
Required for equipment sizing
View RFQ page
Artificial-lift pumps, rods, couplings, ESP sections and gearbox components

Production & Artificial Lift

Sucker Rods and Couplings

Sucker Rods and Couplings for rod lift, ESP completion, surface pumping-unit maintenance and production optimization, with quotation fields for well depth, production rate, fluid properties, gas and solids content, temperature, tubing/casing geometry, installed equipment model and electrical data where applicable.

Standard
API 11B, API 11AX, project specification
Size range
RFQ based
Pressure / load
Depth, rate, viscosity, gas and solids
Model
Well and fluid data
Remark
Required for equipment sizing
View RFQ page
High-pressure surface test manifold with actuated valves and shutdown controls

Surface Production & Well Testing

Surface Test Manifolds and ESD Systems

Surface Test Manifolds and ESD Systems for routing, isolation, pressure control and emergency shutdown between the wellhead, separator, metering and disposal equipment, with RFQ fields covering inlet and outlet pressure classes, line sizes, flow paths, adjustable and fixed chokes, valve type and actuation, sour and erosive service, temperature, piping class, relief and bleed-down, shutdown valves, sensors, logic, fail positions, interfaces and skid lifting limits.

Standard
API 6A or project piping class where applicable, ESD cause-and-effect specification
Size range
Line, choke and valve sizes
Pressure / load
Inlet and downstream pressure classes
Model
Flow path
Remark
Attach the approved process flow diagram
View RFQ page
Tubing-retrievable surface-controlled subsurface safety valve and completion accessories

Completion & Well Service

Surface-Controlled Subsurface Safety Valves

Surface-Controlled Subsurface Safety Valves for fail-safe downhole isolation in oil, gas, injection and selected carbon-storage completion strings, with RFQ fields covering tubing size and connection, valve bore, working pressure, operating and survival temperature, setting depth, hydraulic control-line pressure, closure mechanism, well fluid, material service and validation grade.

Standard
API Spec 14A, ISO 10432 where specified
Size range
Tubing OD, weight, connection and valve bore
Pressure / load
RFQ based
Model
Tubing interface
Remark
Confirm drift and completion restriction
View RFQ page
Vertical surge tank and atmospheric gauge tank for well testing liquids

Surface Production & Well Testing

Surge Tanks and Atmospheric Gauge Tanks

Surge Tanks and Atmospheric Gauge Tanks for liquid buffering, gas breakout, volume gauging and controlled transfer downstream of well-test separation equipment, with RFQ fields covering pressurized surge or atmospheric duty, operating pressure and temperature, liquid rate, surge volume, residence time, fluid properties, gas breakout, level measurement, vent and relief routing, transfer pumps, sampling, sour service, hazardous area and transport format.

Standard
Applicable pressure-vessel or atmospheric-tank code, project specification
Size range
Working and usable volume
Pressure / load
Pressurized surge or atmospheric service
Model
Tank duty
Remark
Provide expected slug and transfer profile
View RFQ page
TEG gas dehydration contactor and regeneration package in a fabrication yard

Produced Water & Gas Treatment

TEG Gas Dehydration Packages

TEG Gas Dehydration Packages for removal of water vapor from natural gas using triethylene glycol absorption and regeneration, with RFQ fields covering gas composition and rate, pressure and temperature, inlet water content, required water dew point, turndown, contactor type and stages, glycol concentration and circulation, regeneration heat duty, still-column and stripping-gas arrangement, flash gas, BTEX or emissions control, filtration, pumps, metallurgy, sour service, utilities, controls and performance test basis.

Standard
ASME BPVC Section VIII, project gas-dehydration specification
Size range
Composition and inlet water
Pressure / load
Pressure, temperature and flow range
Model
Gas cases
Remark
Define required outlet dew point
View RFQ page
Pressure, differential pressure, temperature, flow and level instruments

Instrumentation & Automation

Temperature Transmitters, Thermocouples and RTDs

Compare temperature instruments using published FDWB integrated and compact transmitter examples. Specify the sensor type, calibrated span, probe construction and control-system input separately.

Standard
IEC, ISA, project instrument specification
Size range
RFQ based
Pressure / load
See the separate FDWB integrated and compact temperature ranges
Model
FDWB integrated / resistance-sensor range
Remark
Published range for the resistance-sensor configuration, not for every FDWB variant.
View RFQ page
Tieback receptacle and polished seal assembly sections displayed for inspection

Liner Hanger & Completion Accessories

Tieback Receptacles and Seal Assemblies

Tieback Receptacles and Seal Assemblies for sealed connection between a liner top and an upper casing or completion string during later tieback operations. Review tubular interfaces, load and pressure envelopes, operating sequence, materials, validation and records before requesting a comparable quotation.

Standard
API Spec 19AC, project tieback-completion specification
Size range
ID, length, entry and liner-top connection
Pressure / load
RFQ based
Model
Receptacle interface
Bore
Available polished-bore condition
Remark
Attach original hanger and receptacle records
View RFQ page
Top-drive motor, gearbox, quill and pipe-handling assembly prepared for rig integration

Mud Pump & Rig Spare Parts

Top Drive Systems and Major Spares

Top Drive Systems and Major Spares for rotary drilling, connection makeup, backreaming and mechanized pipe handling on land or offshore rigs, with RFQ fields covering rated hoisting capacity, continuous drilling torque, makeup torque, speed range, motor power, rail and derrick interface, electrical supply, controls, cooling and pipe-handler configuration.

Standard
Rig design specification, applicable API drilling-equipment requirements
Size range
RFQ based
Pressure / load
Rated hook or hoisting capacity
Model
Hoisting rating
Remark
Confirm load path and rig structural interface
View RFQ page
Traveling block and hook block assemblies with polished sheaves

Rig Hoisting & Rotary Equipment

Traveling Blocks and Hook Blocks

Traveling Blocks and Hook Blocks for movable reeved hoisting assembly carrying the drill string, elevators and other suspended drilling loads, with RFQ fields covering rated load, sheave count and diameter, drilling-line size, groove profile, hook opening and throat, bail and link interfaces, swivel or locking function, overall height and mass, anti-collision and position interfaces, bearing lubrication, side-load limits, design temperature, NDT, proof load, certificate and inspection history.

Standard
API Spec 8C, project hoisting-equipment specification
Size range
Sheaves, line and groove profile
Pressure / load
Rated load and reeving arrangement
Model
Hoisting rating
Remark
Match the crown block and drawworks
View RFQ page
Steel-tooth and tungsten-carbide-insert tricone roller-cone drill bits

Drill Bits & Hole Enlargement

Tricone Roller-Cone Drill Bits

Tricone Roller-Cone Drill Bits for rotary drilling across soft through hard formations using steel-tooth or tungsten-carbide-insert rolling cutters, with RFQ fields covering hole size, IADC code, formation and abrasiveness, steel-tooth or TCI cutting structure, sealed or open bearing, gauge protection, jet configuration, expected rotary speed, weight on bit, flow, pressure drop, connection and directional requirement.

Standard
API Spec 7-1, IADC roller-bit classification
Size range
IADC code and hole size
Pressure / load
RFQ based
Model
Formation class
Bore
Steel tooth or TCI
Remark
Supply offset run and dull-condition records
View RFQ page
High horsepower drilling mud pump power end and fluid end

Mud Pump & Rig Spare Parts

Triplex and Quintuplex Drilling Mud Pumps

High-horsepower triplex and quintuplex mud pumps with reference packages up to 2400 HP, 51.7 MPa discharge pressure and 105-127 SPM rated speed.

Standard
API 7K where applicable, signed OEM performance data
Size range
105 SPM
Pressure / load
2200-2400 HP reference models
Model
P-2200 power and speed
Remark
Triplex reference model
View RFQ page
Casing, tubing, drill pipe and drill collars organized on pipe racks

OCTG & Tubular Handling

Tubing and Casing Couplings

Tubing and Casing Couplings for well construction, production tubing strings and drillstring components, with quotation fields for outside diameter, weight per length, grade, wall thickness, range, connection, drift, end finish, quantity, coating and mill documentation.

Standard
API 5CT, API 5DP, API 7-1 as applicable
Size range
OD, wall and nominal weight
Pressure / load
RFQ based
Model
Size and weight
Remark
Use the project tubular schedule
View RFQ page
AI category illustration of a tubing elevator and hydraulic power tong; not a specific model

OCTG & Tubular Handling

Tubular Handling Tools

Tubular Handling Tools for rig-floor handling of drill pipe, casing and tubing during drilling or workover, with quotation fields for tubular OD, elevator or slip type, rated load, contact insert, connection or latch arrangement, operating method and inspection documentation.

Standard
API 8C, applicable inspection specification
Size range
State exact pipe OD and connection OD
Pressure / load
RFQ based
Model
Tubular range
Remark
Include upset or coupling dimensions
View RFQ page
Instrumented horizontal well test separator with piping and controls

Surface Production & Well Testing

Two- and Three-Phase Well Test Separators

Two- and Three-Phase Well Test Separators for separation and individual measurement of gas, oil, water and limited solids during cleanup, flowback and production testing, with RFQ fields covering minimum, normal and maximum wellstream rates, phase fractions, pressure and temperature, fluid properties, gas-oil ratio, water cut, sand and foam, retention time, two- or three-phase duty, vessel orientation, pressure rating, sour service, metering, controls, relief system and skid transport limits.

Standard
ASME BPVC Section VIII, project process and sour-service specification
Size range
Gas, oil, water and solids rates
Pressure / load
Design and operating pressure/temperature
Model
Process cases
Remark
Provide minimum, normal, maximum and upset cases
View RFQ page
Skid-mounted vacuum cuttings transfer unit connected to covered collection bins

Drilling Fluid Handling Equipment

Vacuum Cuttings Transfer Units

Vacuum Cuttings Transfer Units for enclosed pneumatic transfer of drill cuttings, slurries and recovered solids between collection, treatment and storage points. Review process duty, fluid properties, package interfaces, controls, testing and documentation before requesting a comparable quotation.

Standard
Project pneumatic-transfer and drilling-waste specification
Size range
Distance, lift, particle size and moisture
Pressure / load
Transfer rate and batch size
Model
Material and route
Remark
Attach route and elevation sketch
View RFQ page
Disc spring stacks and flange bolting washers for industrial valves

Process Valves, Pumps & Compression

Valve Disc Springs and Flange Bolting Washers

Disc springs for valve actuators, flange-bolt preload and high-temperature service, with published outside diameters from 6 to 534 mm and material-specific service to 700 degrees C.

Standard
DIN EN 16983, DIN EN 16984, project material specification
Size range
6-500 mm outside diameter
Pressure / load
Drawing-specific spring force and deflection
Model
General disc spring size
Bore
0.2-35 mm thickness
Remark
Use the drawing and load-deflection requirement
View RFQ page
Compact vapor-recovery compressor package with suction scrubber and controls

Produced Water & Gas Treatment

Vapor Recovery Compressor Units

Vapor Recovery Compressor Units for capture and compression of low-pressure hydrocarbon vapors from tanks, separators and production facilities for recovery or controlled disposal, with RFQ fields covering vapor composition and molecular weight, minimum normal and maximum flow, suction pressure and temperature, discharge pressure, liquid carryover and suction scrubber, compressor type, turndown, recycle, stages and cooling, driver, seals, materials, sour service, pulsation and vibration, noise, hazardous area, emissions target, control philosophy and package performance test.

Standard
API 618, API 619 or project compressor specification as selected
Size range
Flow, composition and temperature range
Pressure / load
Suction and discharge pressure
Model
Compression cases
Remark
Include startup and low-flow cases
View RFQ page
Vertical drilling cuttings dryer with access platform and sealed conveyors

Drilling Fluid Handling Equipment

Vertical Cuttings Dryers

Vertical Cuttings Dryers for recovery of drilling fluid from oil- or synthetic-base cuttings before transport or downstream treatment. Review process duty, fluid properties, package interfaces, controls, testing and documentation before requesting a comparable quotation.

Standard
Project drilling-waste specification, API RP 13C system context
Size range
Fluid type, solids size and moisture
Pressure / load
Wet cuttings rate and recovery target
Model
Feed and performance
Remark
Provide representative cuttings data
View RFQ page
Produced-water media filter vessel with backwash piping and pumps

Produced Water & Gas Treatment

Walnut Shell Media Filters

Walnut Shell Media Filters for tertiary removal of residual free oil and suspended solids before discharge, reuse or injection, with RFQ fields covering design water rate, inlet and outlet oil and solids limits, particle distribution, water chemistry, media grade and volume, filtration flux, pressure drop, run length, backwash sequence and source, waste volume, vessel count and redundancy, internal coating, corrosion allowance, controls, sampling and performance guarantee conditions.

Standard
Project produced-water filtration and pressure-vessel specification
Size range
Inlet oil and solids distributions
Pressure / load
Design flow and turndown
Model
Filtration cases
Remark
Define required outlet limits
View RFQ page
Skid-mounted well test heat exchanger integrated with separator piping

Surface Production & Well Testing

Well Test Heaters and Heat Exchangers

Well Test Heaters and Heat Exchangers for wellstream heating or cooling to manage hydrate, wax, viscosity, separation and disposal conditions during surface testing, with RFQ fields covering wellstream composition and rates, inlet and outlet temperature, pressure, heat duty, utility medium, fouling and solids, pressure drop, metallurgy, exchanger type, burner or steam requirements, control philosophy, relief, hazardous area, sour service and skid limits.

Standard
ASME pressure-boundary code, project thermal and hazardous-area specification
Size range
Minimum, normal and maximum flow
Pressure / load
Required heat load and temperature change
Model
Thermal duty
Remark
Provide process and utility-side cases
View RFQ page
Vertical sand separator and desander integrated with a surface testing skid

Surface Production & Well Testing

Wellhead Sand Separators and Desanders

Wellhead Sand Separators and Desanders for removal and controlled collection of produced sand and solids upstream of test or production equipment during flowback and cleanup, with RFQ fields covering gas and liquid rate, pressure, temperature, sand loading and particle distribution, erosion velocity, vessel or cyclonic design, dump frequency, solids collection volume, liner material, choke integration, relief, instrumentation, sour service and disposal method.

Standard
ASME BPVC Section VIII where applicable, project erosion specification
Size range
Sand rate and particle distribution
Pressure / load
Pressure, temperature and total flow
Model
Wellstream duty
Remark
State transient slug and peak solids cases
View RFQ page
Wireline lubricators, BOP, stuffing box, tool trap and grease-injection control head

Well Intervention & Coiled Tubing

Wireline and Slickline Pressure-Control Equipment

Wireline and Slickline Pressure-Control Equipment for pressure-controlled electric-line, braided-line and slickline intervention through a live wellhead, with RFQ fields covering line type and OD, toolstring length and fishneck, through-bore, working pressure, lubricator length, wireline valve ram configuration, stuffing box or grease head, tool trap, quick-test sub, pump-in and bleed-off functions, connections, H2S and temperature service.

Standard
API 16B, project wireline well-control specification
Size range
Slickline, braided or electric-line OD
Pressure / load
RFQ based
Model
Line and tool string
Bore
Tool OD, fishneck and total length
Remark
Define weakpoint and cable-head configuration
View RFQ page
Compact wireline winch unit, hydraulic controls and pressure-control equipment

Well Intervention & Coiled Tubing

Wireline and Slickline Units

Wireline and Slickline Units for deployment and depth-controlled retrieval of slickline, braided cable or electric line for logging and mechanical intervention, with RFQ fields covering line type, diameter and length, drum capacity, maximum line pull, speed range, measuring head, winch drive, braking, cabin and data system, mast or sheave arrangement, truck, skid or offshore frame, power source, hazardous area and transport limits.

Standard
Project lifting, electrical and hazardous-area specification
Size range
Line OD, length and drum capacity
Pressure / load
Maximum line pull and safe working tension
Model
Line capacity
Remark
Provide cable construction and minimum bend radius
View RFQ page

OILFIELD RFQ

RFQ intake and sourcing pages for oilfield equipment, drilling tools and spare parts.

RFQ Categories

  • Wellhead & Pressure Control
  • Drilling & Downhole Tools
  • Mud Pump & Rig Spares
  • Sourcing & Export

Resources

  • Buyer Guides
  • Calculators & RFQ Builder
  • Equipment Reference
  • API Standards Navigator
  • Procurement Glossary
  • Solutions
  • About Us
  • Contact

Contact

  • Submit RFQ online
  • China

© 2026 OILFIELD RFQ SOURCING. All rights reserved.

Privacy Policy|Terms of Service