Rig Hoisting & Rotary Equipment
Pipe Racking Systems
Pipe Racking Systems for mechanized movement and storage of drill pipe, stands, casing and bottom-hole assemblies between well center and setback, with RFQ fields covering tubular and stand size, length and weight, setback capacity, vertical or horizontal racking concept, manipulator reach and load, gripper design, cycle time, mast and rig-floor interfaces, hydraulic and electric utilities, control mode, anti-collision zones, redundancy, emergency recovery, hazardous area, cold-weather duty and integration with top drive, elevators and catwalk.
RFQ selection reference
Reference fields for quotation comparison. Final values must be confirmed in the signed manufacturer datasheet.
| Selection field | Typical input | Typical input | Typical input | Buyer note |
|---|---|---|---|---|
| Handling scope | Maximum stand and tool load | OD, length and setback capacity | — | Provide full tubular program |
| Manipulator | — | Reach, axes, gripper and cycle time | Controls, sensing and anti-collision | Define handoff points and exclusion zones |
| Rig integration | Mast, floor and utility loads | — | Top drive, catwalk and elevator interfaces | Attach 3D envelope and cause-and-effect |
Product scope
Pipe Racking Systems are presented as a quotation-ready equipment family for mechanized movement and storage of drill pipe, stands, casing and bottom-hole assemblies between well center and setback. This page helps buyers compare technical offers; it does not promise one model, inventory position, load rating or certification. The final manufacturer must confirm the offered equipment against the rig load case, interface drawings, governing standard editions and signed datasheet.
Selection basis
The main inputs are tubular and stand size, length and weight, setback capacity, vertical or horizontal racking concept, manipulator reach and load, gripper design, cycle time, mast and rig-floor interfaces, hydraulic and electric utilities, control mode, anti-collision zones, redundancy, emergency recovery, hazardous area, cold-weather duty and integration with top drive, elevators and catwalk. Load-path equipment cannot be selected from appearance alone. State whether the request is for new manufacture, replacement, remanufacture or spare parts, and provide maker, model, serial number, nameplate, service history, latest inspection report and dimensioned interfaces for installed equipment. For new projects, attach the rig arrangement, load summary, tubular program, utilities and environmental design data.
Trade and industry context
The cited UN Comtrade record is a broad machinery or hoisting-category export proxy used only to prioritize internationally traded product families. It is not a drilling-only market size or a shipment claim for this equipment. API references identify common technical and inspection boundaries; they do not prove that an unnamed supplier is licensed, certified, authorized or holding stock.
Documents and inspection
Define signed datasheets, general arrangement and interface drawings, structural or load calculations, material certificates, welding procedures, heat-treatment and NDT reports, dimensional inspection, pressure or functional test, proof-load records where applicable, inspection category, certificate of conformity, operating manual, maintenance plan and recommended spares. Verify the actual manufacturer, facility, certificate scope and standard edition before order release.
RFQ checklist
- •Equipment family, new/replacement scope, quantity and delivery date
- •Rated and operating loads, speed, torque, pressure or power cases
- •Rig, tubular, line, structural and utility interfaces
- •Materials, temperature, corrosion and hazardous-area requirements
- •Inspection history, NDT, testing, traceability and certificates
- •Destination, Incoterm, lifting, packing and transport limits
- •Target unit or package price and acceptable technical alternatives
Upload the nameplate, drawings, load cases, inspection records and project specification with the inquiry. Close every interface and certification deviation before comparing price or releasing the order.
Technical reference trail
These public references support the equipment family and selection context. They do not imply dealership, authorization or a guaranteed order specification.
Frequently Asked Questions
What information is required to quote Pipe Racking Systems?
Provide tubular and stand size, length and weight, setback capacity, vertical or horizontal racking concept, manipulator reach and load, gripper design, cycle time, mast and rig-floor interfaces, hydraulic and electric utilities, control mode, anti-collision zones, redundancy, emergency recovery, hazardous area, cold-weather duty and integration with top drive, elevators and catwalk, quantity, destination, delivery target and required records. Attach nameplates, interface drawings and load cases for replacement equipment.
Are the displayed ratings guaranteed?
No. They are RFQ fields. The final signed datasheet, approved calculations, interface drawings, inspection and test records control the ordered equipment.
Can remanufactured or equivalent equipment be proposed?
Only when the buyer permits it. The offer must identify condition, manufacturer, serial number, inspection history, replaced parts, testing, certification scope and every technical deviation.
Technical and RFQ References
Check common units, standards and purchasing terminology, then build a structured request for this equipment.
Submit RFQ for Pipe Racking Systems
Send product, quantity, specification and destination details so the requirements can be reviewed with potential suppliers.
Related Products
Drilling Rig Drawworks
Drilling Rig Drawworks for controlled hoisting and lowering of the drill string, casing and traveling assembly on drilling and workover rigs, with RFQ fields covering rated drilling depth and hook load, fast-line pull and speed, drilling-line size, drum and grooving, input power and transmission, service and emergency brakes, regenerative or dynamic braking, auxiliary braking, cooling, controls, crown and floor protection, spooling system, hazardous area, ambient conditions, skid interfaces, inspection category and replacement-spare scope.
Rotary Tables and Master Bushings
Rotary Tables and Master Bushings for rotary drive, tubular suspension and transfer of torque through the rig floor where a conventional rotary table is required, with RFQ fields covering table opening, static and rotating load ratings, maximum torque and speed, gear ratio, drive arrangement, deck height and footprint, master and split bushing type, kelly-bushing interface, casing-bushing compatibility, lubrication, cooling, guards, braking or lock, controls, hazardous area and matching rig-floor drawings.
Drilling Swivels
Drilling Swivels for suspension of the rotating drill string while providing a pressure-containing passage for drilling fluid, with RFQ fields covering rated load, maximum working pressure, gooseneck and washpipe size, stem connection, bail dimensions, rotation speed, bearing arrangement, seal and packing system, drilling-fluid properties, temperature, lubrication, inspection category, pressure test, NDT, spare washpipe and packing scope and compatibility with hook, hose and kelly or drive system.
Crown Blocks
Crown Blocks for fixed upper sheave assembly transferring drilling-line loads into the mast or derrick crown structure, with RFQ fields covering rated load, number and diameter of sheaves, drilling-line diameter and construction, groove profile, bearing type, reeving pattern, fast-line and deadline orientation, frame dimensions, mounting and crown-beam interfaces, lubrication, guards, sensor or crown-protection interfaces, design temperature, NDT, load testing and inspection category.
Related Technical Articles
API 6A Wellhead Equipment Supplier RFQ Guide
What to specify before asking suppliers for API 6A wellhead equipment quotations. Includes RFQ fields, supplier checks, and internal links for oilfield buyers.
BOP Spare Parts Supplier RFQ Guide
A quote checklist for annular BOP and ram BOP replacement parts. Includes RFQ fields, supplier checks, and internal links for oilfield buyers.
Choke Manifold Supplier RFQ Guide
How to prepare a choke manifold RFQ that suppliers can quote accurately. Includes RFQ fields, supplier checks, and internal links for oilfield buyers.