Process Valves, Pumps & Compression
API 618 Reciprocating Gas Compressor Packages
API 618 Reciprocating Gas Compressor Packages for natural-gas gathering, booster, vapor-recovery, fuel-gas and process-gas compression, with RFQ fields covering gas composition and molecular weight, suction and discharge pressure, temperature, required capacity, turndown, number of stages, cylinder lubrication, driver, speed, cooling, pulsation control, material compatibility, hazardous area and emissions requirements.
RFQ selection reference
Reference fields for quotation comparison. Final values must be confirmed in the signed manufacturer datasheet.
| Selection field | Typical input | Typical input | Typical input | Buyer note |
|---|---|---|---|---|
| Gas and capacity | Normal and rated flow | Gas composition, MW and contaminants | — | Provide water, H2S, CO2 and liquid carryover data |
| Compression duty | Suction and discharge pressures | Inlet temperature and stage arrangement | — | State all operating cases and turndown |
| Package scope | Driver type, power and speed | — | Cooling, separators, controls and pulsation system | Define noise, emissions and hazardous-area requirements |
Product scope
API 618 Reciprocating Gas Compressor Packages are presented as a quotation-ready product family for natural-gas gathering, booster, vapor-recovery, fuel-gas and process-gas compression. This page supports early technical comparison; it does not identify one guaranteed model, stocked unit or universal configuration. The final supplier and manufacturer must confirm the ordered design against the buyer's datasheet, project specification and signed quotation.
Selection basis
The main selection inputs are gas composition and molecular weight, suction and discharge pressure, temperature, required capacity, turndown, number of stages, cylinder lubrication, driver, speed, cooling, pulsation control, material compatibility, hazardous area and emissions requirements. These fields affect equipment fit, performance, safety, documentation and total package price. For replacement equipment, include the installed maker, model, serial number, original part number, clear nameplate photographs and interface drawings. For new projects, attach the governing project datasheet and the latest approved standard editions.
Configuration reference
The table above is a structured RFQ reference rather than a model list. It shows the information needed to compare technically responsive quotations. Published manufacturer examples and industry standards are used only to identify common equipment architecture and purchasing fields; they do not imply dealership, authorization, stock ownership or identical performance across manufacturers.
Documents and inspection
Define the document package before commercial evaluation. Depending on the product, request a signed datasheet, general arrangement and interface drawings, material certificates, pressure or performance test reports, NDT records, hazardous-area certificates, inspection and test plan, preservation procedure, packing list, marking photographs and certificate of conformity. When a standard or certification is mandatory, verify the exact edition, product scope, manufacturing facility and certificate status rather than relying on a website statement.
RFQ checklist
- •Product family, service, quantity and required delivery date
- •Operating cases, pressure or load, temperature, flow and process media
- •Dimensions, connections, materials and approved standard edition
- •Site utilities, ambient conditions and hazardous-area classification
- •Required testing, third-party inspection, traceability and document language
- •Destination, Incoterm, packing, lifting and transport restrictions
- •Target unit price or budget range and acceptable technical alternatives
Upload the specification, drawing, equipment list or replacement photographs with the inquiry. Open technical points should be closed before price comparison and purchase-order release.
Technical reference trail
These public references support the equipment family and selection context. They do not imply dealership, authorization or a guaranteed order specification.
Frequently Asked Questions
What information is required to quote API 618 Reciprocating Gas Compressor Packages?
Provide gas composition and molecular weight, suction and discharge pressure, temperature, required capacity, turndown, number of stages, cylinder lubrication, driver, speed, cooling, pulsation control, material compatibility, hazardous area and emissions requirements, quantity, destination, delivery target and the required document package. Attach the project datasheet or matching equipment drawing whenever available.
Are the displayed specifications guaranteed values?
No. They are RFQ reference fields. The final manufacturer datasheet, approved drawings, test procedure and purchase specification control the ordered equipment.
Can an equivalent configuration be quoted?
Yes, when the buyer permits alternatives. Every deviation in standard, rating, material, interface, certification, testing or delivery scope should be listed clearly for technical review.
Technical and RFQ References
Check common units, standards and purchasing terminology, then build a structured request for this equipment.
Submit RFQ for API 618 Reciprocating Gas Compressor Packages
Send product, quantity, specification and destination details so the requirements can be reviewed with potential suppliers.
Related Products
API 6D Pipeline Ball Valves
API 6D Pipeline Ball Valves for pipeline, gathering, station isolation and piggable full-bore oil and gas service, with RFQ fields covering nominal size, pressure class, full or reduced bore, end connection, body construction, material and trim, seat and seal system, fluid composition, design temperature, actuation, fire testing, fugitive-emission and sour-service requirements.
Forged-Steel Gate, Globe and Check Valves
Forged-Steel Gate, Globe and Check Valves for small-bore isolation, throttling and non-return duties in upstream, midstream and process piping, with RFQ fields covering valve type, size, pressure class, socket-weld, threaded, flanged or butt-weld ends, body material, trim, bonnet design, packing, temperature, process fluid, sour service and fugitive-emission requirements.
API 610 Centrifugal Process Pumps
API 610 Centrifugal Process Pumps for crude, hydrocarbon, produced-water and utility pumping in upstream and process facilities, with RFQ fields covering rated and normal flow, differential head, suction pressure, NPSH available, fluid properties, solids, vapor pressure, operating temperature, pump arrangement, metallurgy, mechanical seal plan, driver, utilities and site conditions.
Progressive Cavity Pumps for Oilfield Service
Progressive Cavity Pumps for Oilfield Service for viscous crude, produced fluids, sludge, polymers and multiphase liquids where a low-shear positive-displacement pump is suitable, with RFQ fields covering required flow, differential pressure, viscosity curve, solids size and concentration, gas content, inlet pressure, temperature, stator elastomer compatibility, rotor material, speed, drive, seal, connections and installation orientation.
Related Technical Articles
API 6A Wellhead Equipment Supplier RFQ Guide
What to specify before asking suppliers for API 6A wellhead equipment quotations. Includes RFQ fields, supplier checks, and internal links for oilfield buyers.
BOP Spare Parts Supplier RFQ Guide
A quote checklist for annular BOP and ram BOP replacement parts. Includes RFQ fields, supplier checks, and internal links for oilfield buyers.
Choke Manifold Supplier RFQ Guide
How to prepare a choke manifold RFQ that suppliers can quote accurately. Includes RFQ fields, supplier checks, and internal links for oilfield buyers.