Well Intervention & Coiled Tubing
Coiled Tubing Injector Heads
Coiled Tubing Injector Heads for controlled running, pulling, snubbing and slow-speed positioning of coiled tubing through the well-control stack, with RFQ fields covering tubing OD range, continuous pull and snub capacity, traction system, minimum controllable speed, drive and brake redundancy, gooseneck radius, load measurement, stripper interface, lift frame and hazardous-area controls.
RFQ selection reference
Reference fields for quotation comparison. Final values must be confirmed in the signed manufacturer datasheet.
| Selection field | Typical input | Typical input | Typical input | Buyer note |
|---|---|---|---|---|
| Tubing range | — | Minimum and maximum coiled-tubing OD | — | Identify gripper blocks and gooseneck radius |
| Load capacity | Continuous pull and snub ratings | — | Slow-speed and maximum-speed range | Provide calculated job forces and contingency margin |
| Integration | — | Stripper, lift-frame and reel interfaces | Hydraulic supply, brakes and controls | Attach lifting and pressure-control stack drawings |
Product scope
Coiled Tubing Injector Heads are presented as a quotation-ready product family for controlled running, pulling, snubbing and slow-speed positioning of coiled tubing through the well-control stack. This page supports early technical comparison; it does not identify one guaranteed model, stocked unit or universal configuration. The final supplier and manufacturer must confirm the ordered design against the buyer's datasheet, project specification, applicable code editions and signed quotation.
Selection basis
The main selection inputs are tubing OD range, continuous pull and snub capacity, traction system, minimum controllable speed, drive and brake redundancy, gooseneck radius, load measurement, stripper interface, lift frame and hazardous-area controls. These fields affect equipment fit, performance, safety, documentation, transport and total package price. For replacement equipment, include the installed maker, model, serial number, original part number, clear nameplate photographs and interface drawings. For a new package, attach process cases, site data, governing specifications and the latest approved standard editions.
Configuration reference
The table above is a structured RFQ reference rather than a manufacturer model list. It shows the information required to compare technically responsive quotations. Public standards and manufacturer examples identify common architecture and purchasing fields only; they do not imply dealership, authorization, stock ownership or identical performance across suppliers.
Documents and inspection
Define the document package before commercial evaluation. Depending on the equipment, request signed datasheets, process and instrumentation diagrams, general arrangement and interface drawings, design calculations, material certificates, pressure or performance test reports, NDT records, hazardous-area certificates, inspection and test plan, preservation procedure, packing list, lifting plan, marking photographs and certificate of conformity. Verify the exact code edition, certificate scope, manufacturing facility and offered model before purchase-order release.
RFQ checklist
- •Product family, service, quantity and required delivery date
- •Operating cases, pressure or load, temperature, flow and process media
- •Dimensions, connections, materials and approved standard edition
- •Site utilities, ambient conditions and hazardous-area classification
- •Required testing, third-party inspection, traceability and document language
- •Destination, Incoterm, packing, lifting and transport restrictions
- •Target unit price or budget range and acceptable technical alternatives
Upload the specification, drawing, equipment list, process data or replacement photographs with the inquiry. Open technical points and supplier deviations should be closed before price comparison and order release.
Technical reference trail
These public references support the equipment family and selection context. They do not imply dealership, authorization or a guaranteed order specification.
Frequently Asked Questions
What information is required to quote Coiled Tubing Injector Heads?
Provide tubing OD range, continuous pull and snub capacity, traction system, minimum controllable speed, drive and brake redundancy, gooseneck radius, load measurement, stripper interface, lift frame and hazardous-area controls, quantity, destination, delivery target and the required document package. Attach the project datasheet, process data or matching equipment drawing whenever available.
Are the displayed specifications guaranteed values?
No. They are RFQ reference fields. The final manufacturer datasheet, approved drawings, calculations, test procedure and purchase specification control the ordered equipment.
Can an equivalent configuration be quoted?
Yes, when the buyer permits alternatives. Every deviation in standard, rating, material, interface, certification, testing or delivery scope should be listed clearly for technical review.
Technical and RFQ References
Check common units, standards and purchasing terminology, then build a structured request for this equipment.
Submit RFQ for Coiled Tubing Injector Heads
Send product, quantity, specification and destination details so the requirements can be reviewed with potential suppliers.
Related Products
Coiled Tubing Strings
Coiled Tubing Strings for well cleanout, nitrogen lifting, acid stimulation, milling, logging conveyance and other continuous-pipe intervention operations, with RFQ fields covering outside diameter, wall thickness, total length, steel grade, yield strength, working pressure, ovality, bias weld spacing, sour-service condition, corrosion allowance, fatigue history and reel or shipping-spool limits.
Coiled Tubing Reels and Levelwinds
Coiled Tubing Reels and Levelwinds for storage, transport, controlled spooling and deployment of continuous coiled-tubing strings, with RFQ fields covering tubing size and length, full reel mass, core and flange diameter, shaft load, reel drive torque, braking, levelwind travel, fleet compatibility, shipping envelope, lifting certification and offshore or land environment.
Coiled Tubing Control Cabins and Power Packs
Coiled Tubing Control Cabins and Power Packs for hydraulic power, operator control, data acquisition and emergency shutdown for a coiled-tubing intervention spread, with RFQ fields covering connected injector and reel loads, required hydraulic pressure and flow, pump redundancy, prime mover, reservoir and cooling capacity, control functions, depth and load sensors, cabin layout, voltage, hazardous-area class, climate and offshore certification.
Coiled Tubing Pressure-Control Stacks
Coiled Tubing Pressure-Control Stacks for wellhead pressure containment and emergency isolation during coiled-tubing intervention, cleanout, milling and stimulation, with RFQ fields covering through-bore, working pressure, tubing size, quad or dual ram functions, shear requirement, stripper type, lubricator or riser length, quick unions or flanges, H2S and temperature service, control pressure, test boundary and lifting arrangement.
Related Technical Articles
API 6A Wellhead Equipment Supplier RFQ Guide
What to specify before asking suppliers for API 6A wellhead equipment quotations. Includes RFQ fields, supplier checks, and internal links for oilfield buyers.
BOP Spare Parts Supplier RFQ Guide
A quote checklist for annular BOP and ram BOP replacement parts. Includes RFQ fields, supplier checks, and internal links for oilfield buyers.
Choke Manifold Supplier RFQ Guide
How to prepare a choke manifold RFQ that suppliers can quote accurately. Includes RFQ fields, supplier checks, and internal links for oilfield buyers.